Sony Ericsson Radio Communications - Page 3 - Popular Questions, Answers, Tips & Manuals
My hbh ds-220 bluetooth headset
Win7 will automatically download & install the required drivers for your SE HBH-DS220 BT headset. After installation, right click the speaker icon in the taskbar and select Playback Devices.
Set the HBH-DS220 stereo as your Default Device...
How to operate
"First, turn on Bluetooth and Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices.
Headset instructions:
- Make sure that the headset is fully charged, turned off and within 1 m (3 ft) of the phone.
- Press and hold the On/Off button for at least five seconds, until you hear along high frequent beep and the light flashes red and green.
- The headset is now in pairing mode.
- If your phone supports auto pairing, press Yes when the question "Add device?" appears in your phone. If not, continue with the next step.
- Prepare your phone according to the phone instructions on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.
Phone instructions (NB: these may differ a little depending on phone model. For exact instructions, see Pairing instructions for the specific headset and phone model on www.sonyericsson.com/support.):
- Enter the main menu and go to Settings, then select the Connectivity tab.
- Select Bluetooth > My devices.
- When New device appears, press ""Add"".
- The phone starts searching for devices. Make sure that the headset is in pairing mode.
- When the headset becomes visible in the Devices found menu, highlight it and press ""Select"".
- Enter the Passkey (0000 by default) and press ""OK"".
The headset is now added to the list of paired devices and is ready to use."
I am using xperia X10...and
Headset-
1. Make sure the headset is fully charged, turned off and within 1 m (3 ft) of the phone.
2. Press and hold the On/Off button for at least five seconds, until you hear a long high-pitched beep and the light flashes red and green. The headset is now in pairing mode.
3. If your phone supports auto pairing, press "Yes" when the question Add device? appears in your phone. If it doesn't, continue with the next step.
4. Prepare your phone in accordance with the phone instructions for adding a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.
X10-
1. From the Home screen, tap the applications bar.
2. Tap Settings > Wireless controls > Bluetooth settings.
3. Mark the Bluetooth check box.
4. The phone starts to search for the device. Make sure that the device is in pairing mode. If needed, tap Scan for devices.
5. When the device becomes visible in the Bluetooth devices found list, tap to select it.
6. If needed, tap the text bar to enter the passcode (0000 by default) and tap OK.
7. You can now start using the paired Bluetooth device. The status of the pairing and connection is shown below the name of the Bluetooth device in the Bluetooth devices list.
Good Luck!
LOST PASSWORD FOR SONY ERICSSON
The generic PIN (Which is what I'm guessing you need) for most bluetooth devices is either 0000, or 1234. Please try those and see if that solves your problem.
I have connect sony BT
right click the speaker icon in the taskbar and select Playback Devices.
set the HBH-DS220 stereo as your Default Device...
I am connected bluetooth device HBH PV705 in
run microsoft updates on your computer 1. control panel 2. system and secruity 3. windows updates f that doesnt work to the manufators website and download the date drivers hope this helps
Not finding what you are looking for?