Sharp Refrigerators - Page 4 - Recent Questions, Troubleshooting & Support


Switch off your ref for 8hrs till all Ice melt in freezer compartment. Switch on Ref and checked Air coming from Ref duct or not.

Sharp... | Answered on Mar 03, 2015


Switch off your ref for more then 8 hrs and checked all ice melt after that you can adjust all attachment .

Sharp... | Answered on Mar 03, 2015


Checked Damper in Ref its working or not. You can checked open Ref door press Door Switch and hold your hand near chiller tray Duct

Sharp... | Answered on Mar 03, 2015


Checked Thermostat and replaced.

Sharp... | Answered on Mar 03, 2015


Main PCB Defective

Sharp... | Answered on Mar 03, 2015


Model No required if two door you can open Glass of Lamp after that open two nut and replaced with same one.

Sharp... | Answered on Mar 03, 2015


Adjust Freezer Temp center and ref also in center

Sharp... | Answered on Mar 03, 2015


Checked Drain pipe behind ref on top Compressor is not full of water

Sharp... | Answered on Mar 03, 2015


You can checked error with pressing select button for 5 second while Ref door open.

If any defect in your ref error will display.

Sharp SJPT640RS... | Answered on Mar 03, 2015


Switch off your Fridge for 24 hrs and after that start. Before starting adjust control to minimum.

Sharp... | Answered on Mar 03, 2015


You can open 3 Screw on top and adjust door.

Sharp... | Answered on Mar 03, 2015


The hole you seek is generally to be found at the back of the fridge low down at the base of a funnel-shaped moulding in the plastic of the lining.

Water droplets formed during the defrost cycle do so mainly at the back where they should be able to trickle until channeled by the funnel shape they fall through a small length of hose into a tray mounted on top of the motor where the heat will evaporate the water.

If you have difficulty finding the hole from the inside then poking a wire or something upwards through the hose from the back should make it more visible as well as ensuring it is clear.

Sharp... | Answered on Feb 26, 2015


Temperature for which part?

Sharp... | Answered on Dec 08, 2014


By adjusting doors you mean the reason door look uneven or doors wont close them self.
Door can be adjusted by proper level of the fridge. Please remember the front legs or casters should be raised, so the door swings close. Also the door is attached to hinges which have some leverage.

Sharp SJPT640RS... | Answered on May 27, 2014

Not finding what you are looking for?
Sharp Logo

106 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Refrigerators Experts

geob91

Level 2 Expert

128 Answers

Elie Balas

Level 2 Expert

170 Answers

Vernon Taylor

Level 3 Expert

5449 Answers

Are you a Sharp Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...