Sanyo Washing Machines - Page 9 - Recent Questions, Troubleshooting & Support

stuck hot water solenoid

bad start up capacitor on motor

Make and model of machine may help you get an answer

check inside water pump impeller might be bad

https://www.fix.com/models/range/electrolux/id326895/ew30is65jsa/ They offer a manual that should have the code description.

http://www.lecreuset.fr/

It seems like your washing machine is experiencing a common issue after a power outage. This could be due to a disruption in the machine's cycle. To resolve this, try the following steps:

1. Reset the Machine:
   • Turn off the washing machine and unplug it from the power source.
   • Wait for a few minutes (around 5-10 minutes).
   • Plug the machine back in and turn it on.
2. Check Door Lock:
   • Ensure that the door is securely closed and the lock is engaged.
3. Restart the Cycle:
   • Select the desired wash cycle and press the start button.

If the issue persists, it might be helpful to consult your machine's manual for specific troubleshooting steps. Additionally, power fluctuations during the outage might have affected the machine's electronics. If the problem continues, consider contacting the manufacturer's customer support for further assistance. Remember, power interruptions can sometimes cause electronic appliances to behave unexpectedly, and a simple reset often resolves such issues.

The 'blades' on your washing machine? It is called an agitator. Make sure the bolt is tight. If it is it is probably the clutch. There is indeed a washer under the bolt head. 'make model (what it is)' in all questions first 3 words. There are over 40,000 categories to choose from. ..

Hello Defy make all types of appliances in South Africa, washers (the category you posted to), dryers, fitted wall ovens and cooking hobs. The secret to providing you with a good answer is full 'make model [number] (what it is)'. If it is a Defy cooktop, take a look at this answer from me last November 2022. https://www.fixya.com/support/t26647811-could_problem_when_defy_stove_displays ..

It looks like it might be a UK Model. They are normally cast aluminium. You may be able to get it welded.. There are some parts suppliers in the links. https://www.google.com/search?q=miele+w3740+drum+spider+replacement https://www.google.com/search?q=miele+w3740+parts ..

'make model (what it is)' in all questions first 3 words please.There are over 40,000 categories to choose from.Googlemake model lock symbolormake model manualIt may be the child lock, so look for that in the manual..

make and model would help! https://www.google.com/search?q=lg+washer+le+code ..

Most washing machine errors will turn off after you have repaired the reason for the error.

also check the impeller of the pump

They are accessed and removed from inside the top console. It is only available in Australia. https://www.google.com/search?q=Kleenmaid+LWK74NW-3050+timer Replacement is typically like this ..

My mabe washer cycle 4 times then stops water is flowing under the bottom and it doesn't spin the clothes any more

An E3 code is the machine detecting an issue with the machine not draining water correctly. Unplug the machine from the main power supply then remove and clean all the filters on the machine. The washine machine can reset if left unplugged for at least 15 to 20 minutes. Unplugging it first then cleaning the filters will take at least that amount of time.