Sanyo Toaster Ovens - Recent Questions, Troubleshooting & Support
The upper element in my Sanyo SK-VF7S no longer
Since it is unlikely that each element has a separate fuse, the element has probably failed.
To verify this and check the element for continuity, you would need a meter capable of measuring resistance, a common feature on even the cheapest meter.
You can buy one of these in auto parts stores, electronic supply stores, on eBay, or, if you have one close to you, at Harbor Freight cheaper than other local stores.
The most basic can measure AC, DC, DC current, continuity and resistance and digital meters have pretty much replaced the standard analog meter; you will be reading from a numerical LCD display.
They are useful to have at home or for your car for checking many things.
Instructions are simple, even understandable if you can correct the butchered English typically found in the manual.
Observe sensible safety by pulling the plug on items measured for continuity or resistance.
If you do want to measure the element, you will find very low resistance if the element is intact; somewhere between 2-3 Ohms and not likely more than 10 Ohms.
You will need to disconnect one end of the element and then measure from end-to-end with the meter.
I need a new oven tray for my Sanyo SK-VF7S
I have same problem.
Found 1 parts distributor who has the part supposedly in stock, but shipping was pretty expensive so I'm waiting:
http://www.pacparts.com/library/model.cfm?mfg=SANYO&model_id=SK7S&CFID=3545458&CFTOKEN=31587034&action=list_part&back=0
Cost was $10.66 but shipping is even more than the part! At least you can get one if you need/want!
Where can I purchase a lower heating element for
www.amazon.com/Sanyo-SK-WA2S...Toaster.../B0013ELXAI
www.amazon.com/Sanyo-SK-WA2S...Toaster.../B0013ELXAI
us.sanyo.com/.../SANYO-TOASTER-OVEN-COMBINES-STYLISH-LOOK-AND-ADVANCED-FEATURES -
www.answers.com/topic/sanyo-toaster-oven
2slicetoaster.com/2009/04 -
www.shop.com/Sanyo_SK7S_Two_Level_Toaster_Oven_Silver-43059213-p!.shtml
Broken handle
http://www.pacparts.com/
6370173276
HANDLE
$9.95
there is also another parts company in Michigan listed on the sanyo site
Not finding what you are looking for?