Sanyo Xacti - Answered Questions & Fixed Issues

not car moved this to camera no model told at all the batteries are no good or connections rusty on most many of these are 13 years old and sold as new by liars endless on the web . models vcp-nnn (lots ) DMX-nnn (lots) the endless list is here. what it uses inside who knows lacking model the battery is bad, or allowed to leak and damaged connectors.

I suggest altering the settings a little and if that doesn't work try using a different software to enlarge images. Such as windows photo gallery. That's not too good for enlarging just good for keeping the quality up if that isn't good enough try using a free trial of photo shop.
Hope I helped Dr Red

Try installing MCP Star player, it's free and it plays just about any video. Get it here http://www.mpcstar.com/

Yes.

This is what the Sanyo CG9 Users Manual has to say about viewing videos taken with the camera:

"About video clip files recorded with this camera
You can use Apple’s QuickTime to play back video clips on a computer.
Playback may be possible using other software that supports the ISO
standard MPEG-4 AVC/H.264 (AAC audio)."

There are many ways to view mpeg-4 videos, but the one that is recommended for your camera from the CG9 support webpage is apple's quicktime available from apple here.

If it is still under warranty, return it to the shop where you bought it.

Do a system reset. Also, make sure the battery is fully charged. Pull the battery out then replace after 30 seconds.

If the batteries died while the camera was in use, the probability is that there has been internal damage to the camera.

It is almost inconceivable if mechanical failure, but a little WD40 spray you can buy at any street corner inside spray can work wonders

memory card connector in camera is defective,,clean & set pins

The camera came with an instruction book.

So i found a place at this website where you can search for it http://dir.indiamart.com/ and also if you dont find it there you can use this next website to find store in delhi that deals in batteries by searching "camara battery dealers" >> http://www.asklaila.com/search/Delhi-NCR

To give you an accurate answer you would have to give a general idea of your location, not your exact location just the city or area, as to get that battery pack you would have to go to a particular cam shop, however you can try ebay to get one at a good price.

I already did answer this? But I forgot the point, If your lens is dirty (must be bad) you only can clean it with a special lens pen or a micro five cloth, if a special fluid is used. Never clean lenses with anything else, because the coating on the lens is easy damaged. When the coating is damaged, you never will get any clear pictures os videos.

Your camera has a feature called MF (Manual Focus) if it is switched to MF, the autofocus won\'t work. If on the right side of the screen is MF, you are sure the camera is in that mode. You can change that in Recording Menu 2.The manual is still online.Success

Please check if the lens can move free. If there is any obstruction, it will stop and the camera will give an error. Also never try to stop the lens from moving. Start over again. Remove the battery, charge it. Place the battery and the memory card when you are sure the memory card is not in the locked position. Then close the battery door carefully, so the door is locked correct. Then switch on again. If the error comes back, perhaps the lens is blocked inside (broken gear or something like that) you have to contact the service centre.

Hey,

yes, with a file recovery software for example
http://www.quetek.com/prod02.htm

Let me know if you need anything else.


Thanks,
Ekse

Take no more pics until you've recovered your photos, take the card out of the camera. This is to reduce the chance of you overwriting some of your "lost" photos. There are many good freeware photo recovery software options that may help you recover your photos. This article reviews and outlines several of the better ones.

Could be a problem with the LCD display... it is defective. If you turn the unit on, and nothing is displayed in the LCD, not even a menu can be displayed and the > play button does nothing to show your pictures... then it is broken.

Go into your menu and reset the camera to factory defaults, then try it.

Where can I find the Sanyo Xacti MPEG-4 AVC manual?