My sandisk pen drive is write protected
Remove write protection from Sandisk pen drive with write protection removal software. Double-click on the WriteProtect value in the right-hand pane of Regedit.exe. Change the Value data from 1 to 0 and click OK to save the change. Close Regedit and restart your computer.
5/12/2018 8:53:27 AM •
SanDisk...
•
1,419 views • 0 helpful votes
How to connect sandisk wireless flash drive to a tablet without a usb port?
If it's Bluetooth / Wifi, you have to pair them first.
Are you 100% sure it's a flash?
If it has a usb port, then it could be a bluetooth or Wifi (wireless communications connection) dongle, not a storage flash drive.
A bluetooth dongle will usually have the double W symbol similar to a spiky 8.
If Bluetooth / Wifi:.....
USB has 4 pins - outer 2 are power to the device, while the inner 2 pins carry data traffic only.
Therefore a BT device, Wifi and a flash storage drive need to be connected to USB for powering its circuit board and relaying data.
Try this if BlueTooth:
Switch ON bluetooth on both devices (flash may have a button / switch, or not), most just use "Remove Device" "Safe to Remove" then yank it out to switch off (as no 5V USB BUS power = 0).
Plugging in powers it up. It's functions are controlled via PC's BT menu.
With BT Flash plugged in, go to your computers device settings or the taskbar may have a BT symbol (like two face-to-face W's).
After switching computer BT on, select "search for devices" or similar, depending on your OS.
It may find several BT devices in your area.
Other BT devices such as Mobile Phone can also find a computer dongle by using the external device's menu to "search" while computer is made "visible" (also vice versa).
5/6/2018 10:22:23 PM •
SanDisk...
•
336 views • 0 helpful votes
I can't format my memory card, the error says
go to computer direct the pointer to this pc right click and select (manage) it will take you to computer management select disc management and select the location of the drive you want format
Hi, have a cruzer titanium 8gb. Had it for over a
You have lost all the data as it is. Unfortunately, you may have pulled the cruzer from the usb port by hand without using the EJECT Format. You should always EJECT a USB Dongle first to avoid STATIC Charge. Static erases the formatted device and washes away all data. In the Winter this condition is more active than when humidity is high. In many cases, the drive can not be formatted again.
How can i unwriteprotect my 16gb sandisk flashdisk
Open up a command prompt as administrator
Type diskpart and press Enter
Type list disk, and you'll get a listing of all drives on your machine.
Type select disk # to select a disk. You can use the Size column to identify which one it is.
Type attributes disk clear readonly - change your USB's properties so that it is no longer read-only.
2/4/2018 10:39:22 AM •
SanDisk...
•
192 views • 1 helpful votes
Not finding what you are looking for?