Samsung Office Equipment & Supplies - Popular Questions, Answers, Tips & Manuals
I can't show ip address of printer samsung ml3312nd
In Windows, you can use the Control Panel to find the printer's IP address.
- Go to Settings > Devices > Printers and Scanners.
- Find your printer in the list, click on it, and select Manage.
- Click on Printer Properties.
- In the General tab, find the Location field. Your printer's IP address will be located in it.
For MAC OS click the Apple sign and locate printers.
How to reset samsung M3320nd
To reset a Samsung M3320nd printer, you can follow these steps:
- Turn off the printer and unplug the power cord from the wall outlet.
- Press and hold the "Stop" button on the control panel of the printer.
- While holding the "Stop" button, plug the power cord back into the wall outlet.
- Continue holding the "Stop" button until the printer's status LED turns on.
- Release the "Stop" button and wait for the printer to finish its initialization process.
- Once the initialization process is complete, the printer should be reset to its factory defaults.
Note: Resetting the printer will erase all the settings, including the network settings. So, you will need to reconfigure the printer settings after the reset, including the network settings if you want to use the printer on a network.
Samsung Xpress m2070 system initialize error
The system initialize error is typically caused by a firmware issue or a hardware problem, such as a malfunctioning sensor or motor. Here are some additional troubleshooting steps you can try:
- Check the error log: The M2070 printer has an error log that can help diagnose the cause of the system initialize error. To access the error log, go to the printer's menu and navigate to "Maintenance > System Data > Service Report." Look for any error codes or messages that may indicate the cause of the problem.
- Perform a firmware update: The latest firmware update for the M2070 printer can help resolve any known issues with the printer's firmware. To update the firmware, visit Samsung's website and download the latest firmware for the M2070 printer. Follow the instructions provided to update the firmware.
- Reset the printer to its default settings: Press and hold the Stop button on the printer for about 10 seconds until the printer restarts. This will reset the printer to its default settings and may resolve the system initialize error.
- Clean the inside of the printer: Open the front cover and remove the toner cartridge. Use a clean, dry cloth to wipe any dust or debris from the inside of the printer, particularly around the paper path and rollers. This can help resolve any issues caused by dirt or debris interfering with the printer's operation.
- Check the printer's hardware: If none of the above steps resolve the issue, there may be a hardware problem with the printer that requires professional repair or replacement. Some common hardware issues that can cause the system initialize error include a malfunctioning sensor, motor, or control board.
Samsung ML-1915 red light flashing, still have 10% toner left, redistributing doesn't seem to help
The red light flashing on your Samsung ML-1915 printer usually indicates a toner error. If you still have 10% toner left, it's possible that the toner cartridge is not making good contact with the printer, or it could be a problem with the toner sensor.
To resolve the issue, try the following steps:
- Remove the toner cartridge and gently shake it to redistribute the toner evenly.
- Reinstall the toner cartridge and make sure it is securely in place.
- Turn off the printer, unplug it from the power source, and wait for a few minutes. Then, plug it back in and turn it on.
- If the problem persists, try a different toner cartridge and see if the issue is resolved.
If the above steps do not resolve the issue, it's possible that the toner sensor or the printer itself is malfunctioning. In this case, you may need to contact Samsung for further assistance.
Stampante Samsung ML-1210 Quando l'accendo, appena finisce il controllo, lampeggiano le spie: Error rosso, Paper arancio
Le spie di errore rosse e di carta arancioni lampeggianti sulla stampante Samsung ML-1210 indicano un problema di alimentazione della carta. Ecco alcune possibili soluzioni:
- Controlla se la carta ? caricata correttamente. Assicurati che la carta sia allineata correttamente e che non ci siano blocchi di carta all'interno della stampante.
- Verifica se ci sono blocchi di carta o altri oggetti estranei all'interno della stampante. Rimuovi qualsiasi oggetto estraneo e riprova.
- Controlla se la carta ? troppo spessa o troppo sottile per la stampante. La stampante Samsung ML-1210 funziona meglio con carta da 60-90 g/m².
- Controlla se la leva dell'attrezzatura di regolazione della carta ? posizionata correttamente. Assicurati che la leva sia nell'impostazione corretta per il tipo di carta che stai utilizzando.
- Controlla se il sensore di alimentazione della carta ? sporco o danneggiato. Pulisci il sensore con un batuffolo di cotone e alcool isopropilico. Se il sensore ? danneggiato, dovrai sostituire la stampante o farla riparare da un tecnico qualificato.
- Prova a resettare la stampante. Spegni la stampante, scollegala dalla presa di corrente e lasciala spenta per almeno 10 minuti. Quindi, riaccendila e riprova.
Se nessuna di queste soluzioni risolve il problema, potrebbe essere necessario contattare l'assistenza tecnica Samsung per ulteriore assistenza.
Print jobs Held in samsung 6260FW
Hi,
please restart your printer and double check that the printer has enough paper. If you're sending test prints from a computer, please try to do so from the printer directly (and vice versa). You can also restart your computer. Otheriwise, you might have to uninstall and then reinstall your printer on your computer.
Thank you.
Not finding what you are looking for?