Samsung Dryers - Page 5 - Recent Questions, Troubleshooting & Support

Can you check the gas pressure? There may be a switch to shut everything off when there is no gas. Check all the safety systems first. Exhaust pressure test switches(gas burner exhaust), and high temperature cut-offs. Even lint build up in the vent exhaust.

No breaker there might be a over load on the motor or a reset on the motor

Hi the other option would be for your hubby to remove the drum and check under or behind the machine

Maybe a broken belt. Maybe a bad door switch. Maybe a bad motor. Maybe improper voltage. Maybe thermal fuse.

Hi I think it is only the senor playing up may have over heated after being clogged, I would re-place the sensor they not cost much. All the best

I couldn't find any information for a 3 way or 4 way vent on your system. You will need to call Samsung for customer support. Here is the link for customer service for Samsung.

http://www.samsung.com/us/support/main/contactcenter.do

Could the vent hose be kinked or crushed in a turn or corner? Another thing to check would be that some driers have a separate belt that runs the air circulation blower off from the same motor that turns the drum which has it's own drive belt. If it has a blower belt and it broke, is over stretched, contaminated with oil or slipped off a pulley or if the blower bearings have seized, The drum would still turn and everything would appear to be OK but the high temp thermostat will still shut it down to avoid damage to the unit or a fire. Good luck.

Motor is going bad.

Either motor is bad or something is obstructing blower wheel from turning.

Here's a video for you it should help you if not go Youtube and put all the info in the search.

see manual for reset button or contact samsung its free to talk to someone

It will be a child lock.to activate or deactivate.

Press the time and sgnal buttons for 3 seconds

Put a meter on it to test for continuity. If good, could be thermal fuse or control board.