Saitek Pro Flight Yoke Suddenly
Try basic troubleshooting first, try to remove and reconnect the ps/2 and usb of the saitek pro flight, also try to put it in different usb ports to see if maybe a usb port is not working, lastly when all else fails try to connect it in another computer and see if it works.
1/2/2018 9:33:03 PM •
Saitek Pro...
•
169 views • 0 helpful votes
Saitek ST90 USB stick, used
If the computer is consistently picking up the Saitek ST90 and it still isn't working it could be a problem with the game rather than your stick.
Do you have another game you can test it on even if it isn't meant for it? Just to see if other games pick it up.
If they don't then I would reinstall all drivers first, if they do get picked up then your best bet might be to reset game to factory settings and if no luck then reinstall the game.
Cyborg evo force joystick seem
You might clean out the registry of any left over values. Try it on another machine if it still does it, its something mechanical inside maybe stuck. I suppose its out of warranty? You cant fly with those stickers anyways if that's what you do. Scourer the junk shops for an old MS Sidewinder, they are still the best stickes ever made.
Need manual for Saitek R4 force wheel
All the manuals and drivers are on the Saitek Website, very easy and straightforward to find and download what you need.
Just make sure it's plugged in to a USB port.
How do I install saitek software on my Mac?
Isn't the panel support within the flight software itself? In which case it would be either in options or preferences. Saitek's software downloads are basically for controllers.
Loaded XPlane 10 on new iMac and rudder pedals no longer function?
My iMac has a CD/DVD drive, but I posted a X-Plane 10 pendrive to avoid inserting DVD #1 every session. It functions perfectly. Another point is to connect all peripherals (stick and pedals etc.) BEFORE launching X-Plane 10. Then calibrate your peripherals within XP 10.
I have no pedals set, but instead a pitch-stick with grip throttle and a Logitech joystick with twist grip to fly helicopters.
Whay is my Saitek X 52 flashing
Most likely a wire going thru the stick to the hat switches trigger button etc have been rubbing on the tube that makes up the base of the stick. I removed the four screws on the bottom and found the solid blue wire had completely broken. I ended up soldering back together and used some liquid insulation let it dry and put it back together and worked fine. I to just had flashing lights on the flight stick. And this is what I found
6/2/2014 8:53:03 AM •
Saitek X52...
•
733 views • 0 helpful votes
Not finding what you are looking for?