Ryobi Garden - Page 9 - Recent Questions, Troubleshooting & Support

clean the spark plug and it will start

check for debris or clog

The grass shear/shrubbery comes with two blades: the 3 in. grass shear blade for cutting grass and light weeds, and the 6 in. shrubbery blade for trimming hedges. Make sure to use the correct blade for your application.? Remove the battery pack, if installed.? Unscrew the lock knob and remove any attached blade from the tool.? Install the desired blade onto the bar stud and secure it in place using the lock knob If that does not work return for new replacement . If you bought it HD I would have returned.

https://www.ereplacementparts.com/flexible-drive-shaft-p-218653.html https://www.ereplacementparts.com/clutch-assembly-p-217782.html?gclid=EAIaIQobChMI4PCWnsGq4gIVRbbACh2QFQ3-EAQYASABEgKShPD_BwE

check clutch and gear ----check switch for power

Once you remove the spool cap and the spool, you cannot remove the head from the motor. It is not a replacement part. Ryobi P2002 Cordless String Trimmer Parts

Most likely carb. Needles sometimes get stuck when in storage where hi temp causes pressure on it.

There will be a broken or damaged wire somewhere or the on / off switch could be faulty. Both will cause it to stop and start.