Ruud Logo

Ruud Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 135 Products
  • 2K Answers

it sounds like unit could be kicking out the low pressure switch or if it is a electric furnace it could be the sequincers

Ruud UBHC Air... | Answered on Mar 13, 2019

You dont need a part number you need voltage horsepower and rpms. shaft size too

Ruud Heating &... | Answered on Feb 26, 2019

If you turn your T.Stat to run and it comes on but in the auto mode it does not come on and the condensed compressor and ODF COMES ON sounds like you need a circuit board

Ruud Heating &... | Answered on Jan 18, 2019

look on inside of doors of unit for codes

Ruud Heating &... | Answered on Jan 18, 2019

need model number from blower casing not coil casing but typically fan speed can be adjusted from control board mounted on blower motor housing.

Ruud Heating &... | Answered on Jan 13, 2019

Pull the hose out from pressure switch and check for any restriction ,also clean where hose is connected to from furnace because that will get clogged

Ruud Heating &... | Answered on Dec 19, 2018

Honestly you need to have a professional look at this.

Ruud Heating &... | Answered on Sep 20, 2018

Yes. May vary depending on air handler its paired with but I would guess 3.5

Ruud Heating &... | Answered on Aug 30, 2018

Typically the M# has the identification on if the unit uses R22 or R410. Look at the data plate. Or get the M# S#

Ruud Heating &... | Answered on Aug 27, 2018

24000 btus/hour= 2 ton

Ruud Heating &... | Answered on Aug 24, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ruud Experts

Donni Steen

Level 3 Expert

687 Answers

Bill Long

Level 3 Expert

603 Answers

Dennis Boxerman

Level 3 Expert

1280 Answers

Are you a Ruud Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides