Russell Hobbs Washing Machines - Recent Questions, Troubleshooting & Support
Russell Hobbs top loader washing machine error code DE
This error code is usually related to door or door lock problems.
To fix this problem, you can do the following:
1. Door check: Make sure the washing machine door is closed properly.
If the door is open, close it and try to start the program again.
2. Resetting the washing machine: If closing the door alone does not solve the problem, you may need to reset the machine.
To do this, press and hold the Quick Start button for 5 seconds to reset.
Then try starting the program again.
3. Check the door lock: Make sure the door lock is working properly and replace it if necessary.
Hi i have a russell hobbs front loading washing machine that wont work
its perhaps trying to open the water valve to let water in but there's a problem with the valve its not letting the water in if you have an electric test meter then take the top off the machine and test across the water valve terminals it should read 230 volts ac if it dose there is no water flow then the valve needs replacing please only attempt this if you are competent to do so even get a friend to help if he is a competent electrician eric
Water leaking from the panel under the turn knob
Water comes in the back, then goes via to solenoid valves to the back of the powder tray, it then is distributed through holes above each compartment, take out the powder tray (push down the blue bit at the back of the softener compartment) and check for cracks or even blockages, (water goes from tray down the back and through a short rubber hose straight into the drum.
Not finding what you are looking for?