Rubbermaid Recent Questions, Troubleshooting Help & Support

Not surprising!

im not sure what model rubbermaid glue gun you have, for most there is a hole in the back and you just slide the glue stick in

Try using a pair of needle nosed pliers, in reverse. Put the tips into the cap and SPREAD the handles. The jaws MIGHT provide enough grab to back the cap out. Otherwise, it will be a try this and try that job. No two are ever alike.

Most models can be used until the child is 30 pounds or 2 years, whichever comes first.

You can get the manual on the link below.

http://www.rubbermaid.com/Assets/Pdf/rubbermaid-3719-assembly-instructions.pdf

If that is not your sheb please look on this link below to let me know your shed.

http://www.rubbermaid.com/Category/Pages/Category.aspx?CatName=Outdoor

Hello,
Which part are you trying to put back in place?
Thanks

Hi,

Click here

You can buy them online for about $5.00...

heatman101

May I get the make and size of the shed to help you more

Here's Rubbermaid's contact info - they have many product lines, and you need to contact
Rubbermaid using the correct avenue:

http://www.ehow.com/how_6794083_do-contact-rubbermaid-problems-purchase_.html

Go to website mentioned below and buy it from there :

http://www.greenlightoffice.com/office/3/rubbermaid-desk-pad

Or call to buy at :1-800-536-6789

Tuff Stuff spray cleaner.use as directed,works really good on many materials.Can find at walmart or dollar store

I would try J B Weld.can find at auto parts store or hardware store.

Gather the materials needed and place them on a flat surface near an electrical outlet. Examine the glue gun. Locate the metal rest. This is usually attached to the barrel of the gun and is shaped like a "W." Make sure it folds out and locks into place. Locate the trigger. This is just behind the barrel on the underneath side of the gun. It should be a solid piece of plastic shaped like a slice of pie. Just above the trigger, is the barrel loader. This is where the glue sticks go into the gun. Inside the barrel loader there is a smaller round piece of plastic. This is what actually pushes the glue stick through the barrel. Pull the trigger and watch the piece of plastic move with it. Pick up the electrical cord and examine it. Make sure the prongs are secure and not bent. Make sure the cord has no breaks in the outer lining and there are no frays at the base of the gun where the cord attaches. Plug the glue gun into the electrical outlet. Allow the gun to heat at least 15 minutes so it reaches operating temperature. When the gun has heated at least 15 minutes, insert a glue stick as far as it will go without forcing it. Now pull the trigger until a small drop of hot glue forms on the tip of the gun. Practice gluing on the paper plate. Pull the trigger until a ball of glue forms on the plate. Release the trigger and quickly press the tip of the gun down onto the surface of the plate and pull it to the side. This will break the glue and stop it from stringing out when you pull it away. Continue practicing until you get the right amount of glue you want for the object you imagine using. When you pull the gun away, there may be a small string but this will break off easily. When you have the perfect amount of glue and only a tiny string forming when you pull away, you are ready for your project.