Rotel Logo

Rotel Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 40 Products
  • 134 Answers
  • 18K Views

Unless yuo can find a Rotel authorized service center, you are not likely to find any service information. These units should not be difficult to repair. Their designs are pretty much standard with a few twists. Any shop that handles audio repair should be able to resolve this. If not, please post your location and I'll try to locate a shop for you.

Also, are there any indications that the unit is trying to work at all or is it completely dead?

Thanks,
Dan

Rotel RX-965... | Answered on Nov 08, 2016


Check the rest of the power supply, for example the transformer if there is no power at all. If you are getting some indication of power, check the voltage regulator circuit.

Rotel Audio... | Answered on Apr 30, 2016


If the Unit Powers On then most probably the Fuses could have gone bad You will be able to replace the Main Fuse yourself but REPLACE WITH THE SAME KIND OF FUSE in terms of RATING

Rotel RX-950AX... | Answered on Jun 25, 2015


Hi Awal. Interesting problem. Have you tried another pair of leads? What source are you using please, cd tuner etc? I noticed the the names for the five audio/video inputs can be customized by the user, Maybe there is a firmware issue? With the unit being surround sound Have you tried running in 2 chanels only?

Rotel Audio... | Answered on Jan 16, 2015


I'm guessing you don't know for sure that it even needs fuses. They don't go out like they used to, as everything is controlled by a microprocessor(computer within your unit). I would suggest, that you, with the power plug pulled out, use an ohm meter to be sure that each fuse is shorted. If you need further assistance, or would like to inquire about a repair, please visit my website at audioserviceclinic.com. Thank you.

Rotel Audio... | Answered on Nov 19, 2014


YOU ARE NOT RIGHT IT SHOULD GIVE AT LAEST A LOW VOLUME SOUND WITH A LOT OF DISTORSION AND A CRACKING NOISE IF DOES I GUESS THAT YOU HAD THIS AMP IN A PLACE WITH A LOT OF HUMIDITY AND YOU HAVEN'T WORK IT FOR SOME TIME IF I AM RIGHT PUT YOUR AMP IN THE SUN AND WORK IT FOR 10 MIN WITH A 5 MIN BREAK LET ME KNOW THE RESULTS

Rotel Audio... | Answered on Sep 03, 2014


IF THE FUSE YOU ARE PLACING IS THE SAME TYPE AS THE ORIGINAL YOUR AMP HAS A PROBLEM WHAT YOU MUST DO IS TO SLIGHTY INCREASE FUSE BY 100 MAMPS PER TIME IF IT IS IN THE TRANSFORMER CIRCUIT YOU CAN INCRESE IT BY 2 AMP MAX IF IT IS IN THE MOSFETS CIRCUIT YOU CAN INCRESE IT BY A MAXIMUM OF 500MAMP LET ME KNOW THE RESULTS

Rotel Audio... | Answered on Jun 14, 2014


http://911manuals.com/preview/Rotel/RB-1090-B-EN1-921-ROR.png
go to that link and drag and drop your image in your pc

Rotel RB-1090... | Answered on Jun 14, 2014

Tip

ROTEL QUALITY


ROTEL AMPS GET HOT QUICKY IN ORDER NOT TO HAVE PROBLEMS DONT WORK THEM WITH NON BRANDED PREAMS OR MIXERS

on Jun 14, 2014 | Rotel Audio Players & Recorders

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Rotel Experts

 Grubhead
Grubhead

Level 3 Expert

5683 Answers

The Knight
The Knight

Level 3 Expert

76036 Answers

Raj Patel

Level 3 Expert

1025 Answers

Are you a Rotel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...