Roper Recent Questions, Troubleshooting Help & Support

Bad control board most likely

Sounds like timer circuit. Roper Washer Parts Same Day Shipping Millions of Parts Here's a parts house.

Use fabric softener.

Growling is often associated with bad bearings and centering casters. Remove the access panel and check belt and centering rollers. Great time and idea to vacuum it out at time also

hello melissa take a close look inside the freezer you will see a little tab under the basket probably in different color puller down and it comes off

Hi! If you need a manual/user guide to your Roger washer, I'm adding a link to a list of manuals to various Roger washers. Hope you'll find there the one you need and fix the trouble. https://manualsbrain.com/en/brands/roper/washers

Check thermal fuse(white fuse on blower housing) and check heat circuit going through timer. Unplug first!

To those who are posting that your washer is filling but not agitating or spinning, check the lid switch. Often times the bar that engages the lid switch gets bent or some play in it and will not fully engage the switch. You can check the switch by feeling for the switch (usually on the left side near the back - under the top) and engaging it with a screwdriver. I was able to get mine working by pounding it with my fist above the switch, with the door closed (Fonzi style :) I then bent the metal bar by holding it with pliers, and with the door halfway open, I pryed the door up while holding the bar tightly with the pliers.

Possibly actuator is bad. https://www.searspartsdirect.com/product/1uodskr9ga-0026-110/id-w10006355

If you are referring to suspension rods or shock absorbers, just replace them.

What is model -#?

Sounds like you've got a bad motor.

Does light stay on when door is closed? Yes, door switch. Could be door switch regardless if light goes out.