I have got a Rollei dp6200 camera and i am trying to find out what is the maximum SD card i can put inside the camera.
That is a good question since it is an older camera and the max included sd card is 64mb. If the formatting of the software reader at the time is compatible with more modern advances in sd storage, it "should" allow for a larger card, but I have seen some older devices that are only setup for the capacities at the time they were released for sale.
Suggest you put a larger card in the camera and follow the formatting instructions in the manual to see your device will format the card. If it can read the card and format, it will probably work.
Need a Rollei afm35 film chamber door, the catch has snapped off?
These cameras are pretty rare so your chances of finding a spare back are slim, I did a search and found nothing, only 2 new cameras on ebay for more than $1000. A new camera might be your next option. They are made by Fujifilm so thats where I would look next.
11/2/2018 11:38:22 PM •
Rollei...
•
Answered
on Nov 02, 2018
•
482 views
Rollei 6008I problem
You can download a manual for almost any equipment by Googling the make and model followed by the word Manual, then follow the appropriate link(s).
HTH
How do I get the protected card mode off?
SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
I cannot retract the lens back to my Rollei 35 se
Your question seems to be mis-categorized under slide projectors, if you are asking about Rollei 35 SE camera, the lens will only retract if you cock the shutter with the wind lever, then press the button next to the shutter release and rotate the lens a few degrees.
Where can i find a new belt for my proj. ?
Hi!!If it's a KODAK Slide Projector, you can contact: www.micro-tools.com for most every service part!! MicroTools bought the entire inventory of KODAK service parts when Kodak went out of the projector business. Good Luck !!! Jim
Not finding what you are looking for?