I have a Rollei
Solved by contacting company purchased from - under their 3 year guarantee they are taking it back.
Problem solved!
Rollei 35 LED: lens barrel
How long have you been having this problem? Did you drop or hit the lens while it was out? Once I have more information I will be able to assist you further.
Thanks,
Lee
Shutter broken
Hi,
can you please give the make and the model no. so that i can find the parts for it..
Waiting for your reply
5/23/2008 2:30:28 PM •
Rollei...
•
Answered
on May 23, 2008
Rollei 66 Dul P projector
I've only worked on one or two of those, with no training in that brand. Good machines but I suggest you try an authorised service shop. here are some links to try
http://www.sl66.com/pg/repair.shtml
In Canada, this company *might* be able to help you. Kominek
405 Yonge St
Toronto ON, M5B 1S9
Phone: 416-977-2132
Shutter Broken
hi,
ok,Since your camera is same as the pic shown then it must be giro 70.Anyways If you have a bill or a warranty card you can have a look at it for the model no.
5/2/2008 6:38:48 PM •
Rollei...
•
Answered
on May 02, 2008
Connection to Rolleiflex SL2000F SLR
I checked out a SL2000F that had good pictures on eBay. I see a standard hot shoe on the side of the camera. That being said, neither a standard shoe connection nor a pc outlet will give you TTL on the Metz. TTL is Transistor to transistor logic (or for camera store people, through the lens) A sensor that reads the light from the actual plane of the shutter is required to allow the Metz to give TTL operation. It will work on the Auto setting, but the Rollei does not have the sensor as described.
Shuter release button stuck
Caused by build up of dirt inside shutter release button :drip small amount of cleaning solvent like methilated spirits , isopropanol or benzine between the button and external wall using tweezers and then lift the button up and down by inserting tweezers into the inner cable release thread .
If this does not work you will need to remove the front cover and clean more fully the release mechanism on the inside of the fron cover. 4 retaining screws are under the leather covering in the front ( 2 on top and two on the bottom )
Memory card cannot be used
Follow these steps:
1. If you have a SD card reader, insert the SD card and look for it in Windows Explorer. In this case, mine was labeled F:
2. Right Click on the drive for the Card Reader (IMPORTANT) and choose FORMAT.
3. Format card with default settings.
4. Turn Camera on and go to MENU> FORMAT CARD
5. Before answering the next question, insert SD card into camera. You will hear it beep twice.
6. Choose FORMAT and the card should be formatted for use on the camera.
Cheers!
Not finding what you are looking for?