Roland Logo

Roland Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 453 Products
  • 5K Answers

Sir errar 1 problem is my keyboard how to repair it's a Juno g keyboard error 1?

Roland Juno-g... | Answered on Mar 12, 2019 | 311 views

SPD-SX: Auto Off - Roland - Support - Knowledge Base - Knowledge ...

Auto Off is a feature that shuts down the SPD-SX automatically when it hasn't been used for 4 hours. This can be helpful if you've mistakenly left the SPD-SX's ... Missing: js8 ‎' ‎Must include: ‎js8

Roland Music | Answered on Feb 24, 2019 | 36 views

Open up the Roland G-70 and check if all the connectors and flatcables are well seated. Check also if the power supply is working as supposed to.

Roland Music | Answered on Feb 23, 2019 | 426 views

The wires were probably broken or disconnected during the move.

Roland Music | Answered on Feb 11, 2019 | 58 views

I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years

Roland Music | Answered on Jan 30, 2019 | 42 views

Possible IC chip shorted or failure on the fader board.

Roland Music | Answered on Jan 16, 2019 | 96 views

No service manuals are available, only User Manuals. Contact Roland direct. Tell them your problem, they will give free information or fix for free.

Roland Audio... | Answered on Dec 23, 2018 | 35 views


Roland Music | Answered on Dec 11, 2018 | 102 views

Static is usually the result of a bad connection. I suspect there is a bad solder joint. If you are electronically inclined, use a listening device or oscilloscope and connect it to the volume control terminals if it is not present on the input to the volume control then it is the volume control that is bad which happens in old equipment best solution is replacing the volume control or you can try cleaning it with an aerosol product for this purpose.

Roland Music | Answered on Nov 30, 2018 | 89 views

If it hums when running on battery power, either your cable from your instrument needs repair, or it's the wrong type (unshielded or TRS) or your instrument has a problem, or you're in an area that has too much RF or electromagnetic interference.

Roland Music | Answered on Nov 23, 2018 | 115 views

Order the manual directly from Roland.

Roland Juno-D | Answered on Nov 19, 2018 | 691 views

Have you tried a different output cable? I know, it seems simple, but it's often the problem. If you have and the problem remains, I suggest calling the manufacturer to see if there is a known problem. Many manufacturers have a website & service number for resolving problems with their products.

Roland Audio... | Answered on Nov 14, 2018 | 58 views

All rechargeable batteries have a lifespan and they may be nearing their end. It may also be that t your charger isn't putting out what it used to. Best to take it in for repair so they can determine the cause of the problem.

Roland Music | Answered on Oct 30, 2018 | 56 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Roland Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

26353 Answers

ray gallant
ray gallant

Level 3 Expert

61685 Answers

Tom Chichester

Level 3 Expert

51293 Answers

Are you a Roland Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides