Roland Logo

Roland Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 453 Products
  • 5K Answers
  • 267K Views

Right, to you too...

Roland Boss... | Answered on Dec 14, 2017


Software, download the Owners Manual and get into it.

Roland Music | Answered on Dec 14, 2017


Nothing ? Or inverted ?
If inverted, get into the menu.
If NOTHING, probably the jack, you gotta open it and check if the solder to the board is good, that can screw up with handling.
Luck..

Roland Music | Answered on Dec 14, 2017


Request the schematic diagram directly from Roland.

Roland Boss... | Answered on Dec 08, 2017


If you buy a second hand, it may have been damaged in mini switch (tact switch) under the WRITE button. You need to replace the tact switch. Easy and inexpensive, you can do yourself, only with a little knowledge of soldering
.patch-not-saving-write-button-not-yaafdoculwfzpmwkmuxstabs-1-0.jpg

Tact Switch:patch-not-saving-write-button-not-yaafdoculwfzpmwkmuxstabs-1-1.jpeg
You may also try the FACTORY RESET.
Restoring the GT-10 to the settings made at the factory is referred to as a "Factory Reset."
Not only can you return all of the settings to the values in effect when the GT-10 was shipped from the factory, you can also specify the range of settings to be reset.


If you do this"Factory Reset", all the setting on user memory (that you create) will be erased, so backup your setting before doing this steps.
patch-not-saving-write-button-not-yaafdoculwfzpmwkmuxstabs-1-3.jpgpatch-not-saving-write-button-not-yaafdoculwfzpmwkmuxstabs-1-6.jpg
For more detail on "Factory Reset", read the GT10 user manual:
roland.com/support/article/?q=manuals&p=GT-10&id=1810803

Roland Boss... | Answered on Dec 06, 2017


It seems that when you engage the recording mode, the RC 3 draws too much power and resets itself. Does it work on battery power? If so, then I'd check the power connector for good fit and for corrosion, and I'd check the adapter for proper voltage, polarity and current. Do you have a "PSA series" AC adapter? If not, then check the fine print on the adapter you have for Output, and make sure it's 9V and also that it says 100mA or higher. The Boss PSA can output 500mA and can usually drive 5-6 pedals with the right breakout cable. And I suppose you already have this, but just in case you want to RTFM: Boss RC-3 Manual.pdf 8-)

Roland Computers... | Answered on Dec 03, 2017


If it is a drum machine, why have you posted this query under Cameras ? You may get more help posting it under musical (and I use the term loosely) instruments.

Roland DR-3 -... | Answered on Nov 13, 2017


Make sure there is not a switch that makes it output to external speakers.

Roland Music | Answered on Nov 06, 2017


Well it could be a sereis of things. First of all, check compatibility with your opperating system, if that is ok go back to the Korg website and re-download again.

Roland Juno... | Answered on Oct 31, 2017


Go to "YouTube" and type in "Roland FP8 piano repair"

Roland Music | Answered on Oct 25, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Roland Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

26437 Answers

ray gallant
ray gallant

Level 3 Expert

62139 Answers

Tom Chichester

Level 3 Expert

51383 Answers

Are you a Roland Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...