Roland Music - Answered Questions & Fixed Issues
Roland Cube 30 Bass Amp won't turn on?
1. Check the power cable and ensure it is securely connected to both the amp and the power outlet.
2. Check the fuse and replace it if needed.
3. Check the power switch and ensure it is in the correct position.
4. Check the battery (if applicable) and replace it if needed.
5. If the amp is still not turning on, contact Roland customer service for further assistance.
4/10/2023 12:39:05 PM •
Roland...
•
Answered
on Apr 10, 2023
•
196 views
Roland BOSS RC-20XL Loop Station will not record or play
If your Roland BOSS RC-20XL Loop Station will not record or play, there are a few troubleshooting steps you can try:
- Check the power source: Make sure that the Loop Station is properly powered and that the batteries or power supply are providing sufficient power. If using batteries, try replacing them with fresh ones.
- Check the connections: Ensure that the input and output connections are properly connected and that there are no loose cables. Try using different cables to see if that resolves the issue.
- Check the settings: Make sure that the Loop Station is set to the correct mode and that the input level is set appropriately. Refer to the user manual for guidance.
- Reset the device: Try resetting the Loop Station to its factory settings. Refer to the user manual for instructions on how to do this.
- Service: If none of the above steps work, the Loop Station may need to be serviced. Contact the manufacturer or a certified repair center for assistance.
Hopefully one of these steps will help you get your Roland BOSS RC-20XL Loop Station working again.
4/10/2023 12:52:41 PM •
Roland BOSS...
•
Answered
on Apr 10, 2023
•
1,072 views
Hi. Can I use the second pedal on my Roland BK5 to scale up the key one semitone at a time?
Yes, you can use the second pedal on a Roland BK-5 keyboard to transpose the key of the music that you are playing up or down by a semitone at a time. To do this, you will need to press and hold the second pedal while playing the keyboard. You can also use the transpose function in the settings menu of the BK-5 to adjust the key of the music that you are playing by a specific number of semitones.
1/5/2023 4:04:49 PM •
Roland Music
•
Answered
on Jan 05, 2023
•
49 views
I need a circuit diagram for a Roland MA-15D speaker please?
It's a Chinese made Roland and no service information is available as when a fault is found the main board is replaced, eliminating the need for service information.
I would check that it is a stereo out jack and not mono. If it is a stereo out, check that both input phonos work. If they do, replace the faulty socket or damaged pcboard.
11/17/2022 6:14:26 PM •
Roland Music
•
Answered
on Nov 17, 2022
•
67 views
Not finding what you are looking for?