Roland Cameras - Recent Questions, Troubleshooting & Support
I just need a big
This should definitely do it. I think the style you want is one of the kicks which are k01 through k09 I think.
You need to setup your own style etc as follows:
Select a Number for the Style You Are Creating
Make the Settings for the New Style
Record the Patterns
(Realtime Recording/Step Recording)
Check the Created Style
- Set the Tempo
- Set the Beat
- Set Up the Drum Kit
- Set VARIATION [MUTE]
- Make the TSC Settings
- Determine the Number of Measures for Each Pattern
(These settings can be changed after the patterns are
- Record the Drum Part
- Record the Bass Part
- Change Dynamics to the Sounds (Velocity Edit)
- Transpose the Bass Part
- Edit the Settings
- Name the Style
Roland DR-3 -...
on Sep 18, 2011
Pinchroll error, cant initialize machine
Pinch Roller errors mean that the location of one or more of the pinch rollers is not correct. To fix the problem, simply try raising the pinch roller levers and move the pinch rollers to their proper positions above the grit rollers.
Reposition the material to match position with new adjustment. If you still get the error, then is the left grip roller that is not centered over the girt roller.
Also Ensure that you are setting the base point immediately to the right of the crop mark (it should have a rectangle on it).
If you are still getting this error you will need to ensure that the roller sensor magnets are still connected. Right behind the roller is a small rectangular magnet. After years of use this
magnet missing the magnet is missing the unit will need to go in for repair.
In that case call the Roland support number found on the user manual.
on Oct 18, 2010
Not finding what you are looking for?