Rokinon Cameras - Recent Questions, Troubleshooting & Support

Fixya does not provide any kind of internet connectivity - methinks thou mayst have directed thy query to the wrong site.

All mirror lenses are manual. Photo is under-exposed - use higher ISO or longer shutter speed.

You can download a manual for almost any equipment by Googling the make and model followed by the word Manual, then follow the appropriate link(s).

Samyang 10mm 2 8 Wide Angle Lens Unboxing Impressions Sample Pictures Regarding a 3rd party lens it always have some problem. Manually pictures can be taken , if completely not supported. Check the video and find similarities. Like keep F- 22 IN LENS , ( or the highest FNumber ) .. turn on manual controls.. then shoot.. check if this helps and inform

From Internet, check it whether it works for you. *********** 52371 and 53061 are the two codes listed for Roku for the RCRN04GR remote. The 53061 code worked with full functionality for my Roku 3. ************

The Roku and the Lenses are 2 different issues... repost it in the right category. I am still able to help you on the ROKU

Change the Input on the TV. Like from HDMI 1 to HDMI 2 for example. Or to component video. Trace the wire from your cable /satellite receiver and see where it's plugged into the TV then select that input.

The lens does not have the electronics to communicate with the camera. It will work fine in Manual exposure mode. Turn the mode dial to M. You'll have to set the shutter speed yourself, without any help from the camera's exposure meter. You'll also have to focus yourself, of course.

It is possible you may have purchased an adapter that does NOT function in "auto-focus" and if you have an auto-focus lens, the electronic connections between the two may not be compatible. This may be causing that problem.

Theres a button on the back of the camera with the protect sign push it again on that picture it will go away push on push off. nothings permanent. Goodluck Ozout!

Turn the mode dial to "M". You control the shutter speed by turning the command dial, and you control the aperture by turning the aperture ring on the lens. The camera's exposure meter is shut off and won't help with the exposure. You can shoot a picture and look at it on the display to judge the exposure.

Do you have a lens collimator and other equipment necessary to ensure proper alignment when reassembling the lens? If not, take it to a good camera shop and have a properly trained and equipped professional do the job.

Cannon does not say what error codes above code 02 mean. They only suggest the costumer to make contact with the nearest Canon service centre. But connecting a non autofocus lens from an other brand, could be something the camera can't cope with. And the most Canon (and other brand) camera's can't focus when a lens has a aperture greater than f/1: 5,6. The f/1: 6,3 or perhaps even f/1: 8 is one or two stops to much for your camera. Special when you try to use this lens in no bright places.

Are you trying to waste people's time here, or what? Rokinon lens, Nikon mount, then mixing that with a Canon EOS 350D???

This will have to be sent in for repair, no other way around it. Call a camera repair facility first before you send it in to get a quote, many times a new or used lens is cheeper. Don't forget to check Ebay. Good-luck

Nikon makes several different 85mm f/1.4 lenses, but it appears you're using one with an aperture ring. Turn the aperture ring to its smallest setting (largest f/number). You can control the aperture from the camera body, the same was as on a lens without an aperture ring.