Rockford Fosgate Car Audio & Video - Popular Questions, Answers, Tips & Manuals
I have a Rockford Fosgate 1500 BD amplifier and terminals for the power cable will not loosen or tighten how do I fix it
First off will the fastener turn ? If not try using a bit of wd-40 and letting it "soak" for a little while . Also be sure you are using a good proper sized Phillips screwdriver . If the fastener still won't turn try using a can of "computer duster " inverted so the liquid comes out , note this will be well below zero degrees , and freeze the screw head , then try turning . If the fastener is stripped and the ttol slips you will have to remove the amp cover and grip it with a pair of vise grips ,pliers or a flat blade screw driver .
How do you rebuild a Rockford Fosgate 12 inch P3 subwoofer
Depending on what model of P3 you have, you'll need to order re-cone parts. The subwoofer will have to be stripped down to a bare basket and all glue sanded off and surface clean. Shims will be needed to get the coil in place properly around the pole. Clamps may be needed as well until the glue sets. There are many videos online to show you how.
Where is the fuse located
The 40A fuse should be immediately to the right of the B+ terminal. If you bought this amp used, and it's never turned on before, it's possible the previous owner removed the fuse. It's hard to miss if it's actually there, so you're probably seeing an empty slot where the fuse is supposed to be. With the radio turned off, insert a 40A ATC (blade style) fuse into the slot, and then power it up.
If you need further help, I’m available over the phone at
https://www.6ya.com/expert/reginald_bec291de192ca44f
Not finding what you are looking for?