Rockford Fosgate Car Audio & Video - Page 6 - Recent Questions, Troubleshooting & Support

repair it, or get a new one.

you have an internal short inside the amp

how to install or where to install?

add a 3 ohm resistor in series at the negative post of the speaker.

amp is clearly overheating. you are over-driving the amp. you can, cool the amp better, turn the volume down, and/or check the the speaker configuration you are using is appropriate for the amp you're using.

where do you live

whats the issue

yes, they will work fine. best speaker? how much are you willing to spend

Its been running hot.

turn down the gain until you can go full volume without distortion. crossover frequency is always up to the user.

what kind of noise

which wires?

I had the same problem on a different Fosgate amp. It was an old 301s. It was a drive circuit transistor.

MJD44H11

Can't get your link to work. If you need a cross reference try mouser.com of digikey.com or mcmelectronics.com. if you want to have it repaired try linearpower.com. their sister company is t.i.p.s. and the owner is very well known for quality work.

RECONING SUBWOOFER HOW TO STEP BY STEP If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_70466cb634a57543

Hey i have looked over many rockford manuals,(i own a 300.1 my buddy owns a 325.1) and for there mono(.1) amps there hooked together on the inside so channel A+ and B + are cencted on the inside the amp. So you ither hook one 2ohm sub to channel A or you can hook 1 4ohm subs to channel A and 1 4ohm sub to channel B. There 2ohm stable so any lower will eventualy burn the amp out.

run them in sereis hooking them all up together and bridging the amp

Inside the amp.

you have burned the coils and it is froze. i doublt you can get recone kits for the cheaper models. best to get a new one.