Robinair Recent Questions, Troubleshooting Help & Support

it is a vacuum pump and not a car so moved to vacuum tools take it back to seller and exchange it or get money back. or bought off "AmaZONED", AND IS REALLY USED JUNK SOLD THERE AS NEW, AND IS NOT.(ENDLESS PAIN THERE) I AVOID THEM LIKE THE PLAGUE NOW, FOR YEARS CAME IN A SEALED BOX WITH FULL INSTUCTIONS AND ITS STRAPPED FOR 240VAC, AND FAIL TO SET IT UP FOR USA WIRING? THAT IS A TOP BRAND FOR AC WORK BUT THEY SELL EXPORT MODELS, AND WHAT IF YOU GO THAT./ SKIPPED STOP 3 TO 7 HERE https://www.manualshelf.com/manual/robinair/15310/manual-english/page-4.html YOUR MODEL IS USA VERSION, SAYS MAKER.

With power off, open the filter & check two 'O' ring of filter is in the right position then replace filter again. Hope this will solve your problem.

You confirm it by how it functions, if it sticks in a mechanical way there is no electrical testing that would be valid. I would just replace both solenoids.

Manifold solenoids identification for 34788NI. Hope this will help you.

You have to contact them direct. https://www.google.com/search?q=Password+for+service+menu+on+a+Robinair+34788NI ..

it needs service or is full the service manual on it covers that, lost the manual? if yes, lost ask the maker for it. they are a top brand, for sure.

Question edited for full 'make model (what it is)'. Question moved to a Robinair category. Contact their Technical Support Line

Contact Us - Robinair

https://www.robinair.com > contact-us Customer Service Phone: 800-533-6127. Fax: 800-283-8665. Email: [email protected] ; Technical Support Phone: 800-533-6127. Fax: 866-259-1241. Email: ... ..

Very specialised equipment, contact their free support line. Customer Service / Tech Support 1-800-533-6127 [email protected] ..

17800C%2C%2017800C-230%20Operator%20Manual_0.pdf (robinair.com) See page 28

Disconnected Air Purge lines. It was under high pressure (careful).

From the main menu go to change default option,press 5454 then press enter key.after access to default nenu you have to select calibrate scal option.press again enter key then follow the on scree message.NOTE:FOR SCAL CALIBRATION YOU SHOULD HAVE 9KG/20LB OF WEIGHT.once you done so,press stop key to complete the prcess.

Does anyone know the password for service menu on a Snapon eco plus it's a robinair machine

it gets injected on low side [suction side ] high side your just pressurizing oil container

Try 2200. Good luck

Please be informed that, one code can be use only one time! However now i will give one more new code: 6FAAC95001. Apply it now and solve the problem! Don't forget to vote for it, if you wish to get help in future. Good luck....

============= Make Model (what it is) Describe Problem in the title Mention the problem, plus everything you have done and what you are trying to do. ============== That image is two dusty things with wires on a 'Robinair Measuring Tools and Sensors' category.

This is a common problem of Model: 34788, 34788-I, 34988, AC34788, GE48800 etc. You need to replace air purge solenoid (Air purge solenoid located on top of the ISV tank, if you open front panel cover then you can see it on top of the tank). After doing above stapes and your problem still exist then you have to replace PCB relay board. Hope this will solve your problem, if so please vote for it for farther help! Good luck

You can try 1# With power on press and hold for 4/5 sec. up & down arrow key at the same time
2#With the power on press YES/START & NO/STOP key at the same time

Here are different options: https://www.carenpfleger.com/robinair-17400-manual.pdf => you need to create an account for you to be able to read this online http://media44.club/download/books.php?Robin+Air+Model+17700A+Owner+Manual

Open oil drain solenoid and clean solenoid plunger with dry soft clots and replace it. After that check the apply vacuum, if you still have same issue then you may need to replace oil drain solenoid. Hope this will help to solve your problems. Thank.