Ricoh Recent Questions, Troubleshooting Help & Support

Check out this YouTube link and see if that helps: https://www.youtube.com/watch?v=QFlABIeo29M

If you are experiencing issues with loading toner on a Ricoh MP 4002 printer, there are a few possible causes that could be contributing to the problem. First, check the toner cartridge to ensure that it is compatible with the printer and has not expired. Additionally, make sure that the toner cartridge is properly positioned into the printer. If the toner cartridge is not correctly installed, it could be preventing the toner from loading properly. Next, check the toner hopper, which is the component that holds the toner in place, and ensure that it is not damaged or blocked. If the hopper is damaged, it will need to be replaced. If the hopper is not the issue, then it is likely that the transfer roller, which is responsible for transferring the toner to the paper, is not functioning properly. In this case, the transfer roller will need to be replaced. If all components are working properly, then it is likely that the problem lies in the printer itself. You may need to take the printer to a service center for a more in-depth inspection. Written by Chatsonic

Your camera is in cocked position with shutter fully cocked and that is why you cannot advance the film advance lever. Set the shutter to x position ( on your shutter speed dial on the right hand side and top of your camera ) . The shutter should release and then you should be able to advance the film advance lever.

The SC361 error code on a Ricoh Aficio MP C2551 is typically caused by a problem with the fusing unit. The fusing unit is responsible for heating the toner particles and fusing them to the paper. This error code can be caused by a variety of issues, such as a malfunctioning fusing unit, a problem with the thermistor, or an issue with the fusing lamp. Here are a few steps you can try to troubleshoot and resolve the SC361 error code:

1. Check the fusing unit: Make sure that the fusing unit is securely installed and that there are no visible signs of damage.
2. Check the thermistor: The thermistor is responsible for detecting the temperature of the fusing unit. Make sure that it is connected properly and that it is functioning correctly.
3. Check the fusing lamp: The fusing lamp is responsible for providing heat to the fusing unit. Make sure that it is functioning properly and that it is not burned out.
4. Check for jammed paper: If there is jammed paper in the fusing unit, it can cause the SC361 error code to appear. Remove any jammed paper and clear the area.
5. Check for debris: Make sure that there is no debris or dust buildup in the fusing unit that could be causing the problem.
6. Performing a reset: Try performing a reset on the printer to clear any temporary error codes.

If the error persists, it's best to contact a Ricoh service technician for further assistance. They will be able to diagnose the problem and repair the printer. It's important to note that attempting to repair the printer on your own may void the warranty and could cause further damage.

To clear error code SC669-03 on a Ricoh MP2501 machine, try the following steps:

1. Turn off the machine and unplug it from the power source.
2. Wait a few minutes, then plug the machine back in and turn it on.
3. Perform a reset by holding the "Clear Modes" button for 5 seconds.
4. If the error persists, check for jammed paper in the paper tray or paper path.
5. If there is no jammed paper, contact a service technician for further assistance.

About the only thing you can do is clean the batt. cover and contacts in batt holder. Make sure batts are good. No parts are avail. for this model. However this is a rugged camera and you can buy a hand held light meter inexpensive.

Paper pinch roller is having some problem may be there is a paper jam or Cartridge try to remove all papers then remove the ink cartridge pull out the power wait for some time ,put back the paper without ink and paper check if the error is changed if yes replace your ink if still there check for any paper jam clean it all properly and start again.

The issue you're describing with your Ricoh Pro 1357EX printer shutting off automatically while printing and displaying the message "please wait" on the monitor, could be caused by several factors. Here are a few steps you can try to troubleshoot the problem:

1. Check the power source: Make sure that the power source is functioning properly and that there are no issues with the electrical outlet or power cord.
2. Check the thermistor: Make sure that the thermistor is functioning properly and that it is not clogged or damaged. The thermistor is responsible for monitoring the temperature of the fuser unit and can cause the printer to shut off if it detects a problem.
3. Check the fuser unit: Make sure that the fuser unit is functioning properly and that it is not clogged or damaged.
4. Check for jammed paper: Make sure there is no paper jammed inside the printer. If there is, remove it carefully.
5. Check the software: Make sure that the software and the driver of the printer are updated and installed correctly.
6. Check the hardware: Make sure that the hardware of the printer is working properly.
7. Consult the manual: Consult the manual for specific troubleshoot and service information for your Ricoh Pro 1357EX model.

If the above steps did not resolve the problem, it is best to contact Ricoh customer service for further assistance and repair options.

for sc101 Exposure lamp errorThe standard white level was notdetected properly when scanning thewhite plate.

Straightforward answer: no. Everything needs power to work except for the self timer, but even that won't fire the shutter without battery power.

Error SC324-01 on a Ricoh MP-C4503 copier typically indicates a problem with the laser unit. Here are a few things you can try to fix this error:

1. Check the laser unit for any visible damage or debris. If you find any, remove it and try turning the copier on again.
2. Check the laser unit connectors to make sure they are securely seated. If they are loose, try tightening them and see if that resolves the issue.
3. Check the laser unit cable for any visible damage. If you find any, try replacing the cable and see if that resolves the issue.
4. If the error persists, try resetting the copier by turning it off, unplugging it, and waiting for a few minutes before plugging it back in and turning it on again.

If your Ricoh MP5000 printer is displaying the "Please Wait" message, it may be due to a problem with the printer or an issue with the print job. Here are a few things you can try to fix the issue:

1. Restart the printer: Sometimes a simple restart of the printer can fix minor issues. Turn the printer off, wait a few minutes, and then turn it back on again.
2. Check for errors: Check the printer's control panel for any error messages or codes. These messages can help diagnose the problem.
3. Cancel the print job: If the "Please Wait" message is displayed while a print job is in progress, try canceling the print job. You can do this through the printer's control panel or by using the printer's cancel function on your computer.
4. Check for paper jams: If the "Please Wait" message is displayed while the printer is attempting to print, there may be a paper jam. Check the printer for any jammed paper and remove it if necessary.

If these steps do not fix the issue, there may be a more serious problem with the printer. In this case, it is recommended to contact Ricoh customer support or a printer repair technician for further assistance.

I've just discovered that Ricoh's built in software only works if your SMTP server sends out without picking up password or authentication.
Having same issue and it worked fine when it was behind corporate firewall with the same connection settings (IP address) as the SMTP server.
Once I changed web hosting - it won't recognize the SMTP server or any authentication methods. According to IKON (Ricoh support for the USA) - your SMTP server has to have "relay exception"

SC669-01 to -26, -36, -37

http://195.50.207.134 > Tehdoc > en-GB > main > int SC669-03: EEPROM OPEN: Device Error ... SC669-05: EEPROM OPEN: Communication Timeout Error ... SC669-14: EEPROM Data Write: Communication Abort Error.

mp2501 sc669-03 - Copytechnet

https://www.copytechnet.com > forums > 121758-mp2... Jul 20, 2017 - Hi Guys i have a mp2501 thats giving me sc669-03 EEPROM communication error - Device error languages under system settings is english when i ...

https://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/121758-mp2501-sc669-03-a.html

Question edited for a lot more clarity. Videos https://www.google.com/search?q=Ricoh+SP-220NW+error+551 ..

SC995 Serial Number Setting Incorrect The 11-digit serial number is printed on the data plate. This information is compared with the installed components to detect mismatches. Did you remove any of the machine parts or components? Reinstall anything you removed and see if the error is resolved. If it's a problem with the NVRam, you'll need to contact an expert.

• Code: E-24
• Description:Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.
• Causes:Drum sensors Feeler

https://www.google.com/search?q=Ricoh+JP+750+e24+error+code ..

sc582 is an inverter error. The coil that heats the fuser may be bad, or there may be a bad connection somewhere. If you go into SP mode and execute SP 5810 to reset the fuser, see if the code comes back. If it does, have a Ricoh technician check the IH coil and the connections for it.

Question edited for clarity. https://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/61795-mpc4500-sc581-help.html More here https://www.google.com/search?q=Ricoh+MP+4500+printer+is+showing+error+code+SC581& ..