Ricoh Aficio - Recent Questions, Troubleshooting & Support - Page 4
Rico nrg c7521n error sc441
Development Motor Lock While the motor is operating, the motor lock signal remains LOW for 2 s. Causes. • Motor lock
Error message says reset PCU correctly
You get this message because the PCU isn't seated properly.
This is a link for the user manual for this printer:
http://www.ricoh-usa.com/downloads/manuals/printers/cl2000.pdf
On page 13 shows a diagram that indicates the photoconductor unit on the printer.
Page 60 shows you different error messages, what they mean and how to fix it. It means you have to take out the pcu and reseat it into the printer, it is not in correctly.
Page 29 shows you how to do this. It has pictures of how to take out the pcu and put it in correctly.
I hope you get it fixed.
What is error code 460 on a Ricoh Aficio SP C811Dn
SC 460 The problem may just be dirty separation components that a cleaning may resolve. The code refers to the following:
High voltage power: Separation bias output error
The status of the power pack is checked every 20 ms. This SC is issued
if the EGB detects a short in the power pack 10 times at D(ac).
1. Replace the high-voltage supply cable.
2. Replace the high-voltage power supply unit
3. Replace the IOB.
Ricoh aficio 2027
SC542 is a warm up error from the fuser.
SC 870 is an address book error.
Turn the power off on the copier. Wait 30 seconds and then turn the power back on. See if it goes away.
Let me know if it doesn't.
Not finding what you are looking for?
