Ricoh Logo

Ricoh Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 1K Products
  • 42K Answers
  • 919K Views

SC 460 The problem may just be dirty separation components that a cleaning may resolve. The code refers to the following:
High voltage power: Separation bias output error

The status of the power pack is checked every 20 ms. This SC is issued
if the EGB detects a short in the power pack 10 times at D(ac).

1. Replace the high-voltage supply cable.
2. Replace the high-voltage power supply unit
3. Replace the IOB.

Ricoh Aficio... | Answered 15 hours ago


1. Mode(Yellow Button)
2. 107
3. Press STOP Button for 3 second (RED Button)
4. Copy Sp
5. 5810#
6. Excute
7. Power Off
8. Power On

Ricoh Aficio... | Answered Yesterday


in user tools turn off dhcp and manually enter the ip address.

Ricoh Aficio... | Answered 2 days ago


Can't help with the password, If you have the install disc delete the printer from the hard drive , then reinstall it making a new password.

Ricoh Office... | Answered 3 days ago


when powering on, ricoh priport jp 1050 indicated 02
pls help how can solv

Ricoh Office... | Answered on Mar 14, 2019


Ricoh Aficio SP c430dn factory reset
Resetting to factory defaults will erase all stored data. Press the "./*" key and the "#" key on the Ricoh copier at the same time and hold for 10 seconds. Nothing will seem to happen until you hold both buttons down for the full 10 seconds.

Ricoh Aficio... | Answered on Mar 13, 2019


Can you tell me the model of your machine and I can then advise how to reset the photoconductor counter.

Ricoh Aficio SP... | Answered on Mar 13, 2019


Dear kishorkamble,

We fixed this error, which happened in another model (Aficio MP-5500), by configuring two options:
1. Activating SNMP protocol. Menu Configuration -> Network -> IPv4
2. Activating RSH/RCP protocol. Menu Configuration -> Network -> SNMP

I hope it may be useful.

Yours sincerely,

Bruno Coutinho

Ricoh Aficio... | Answered on Mar 12, 2019


SC995 Serial Number Setting Incorrect The 11-digit serial number is printed on the data plate. This information is compared with the installed components to detect mismatches. Did you remove any of the machine parts or components? Reinstall anything you removed and see if the error is resolved. If it's a problem with the NVRam, you'll need to contact an expert.

Ricoh RICMP2550B... | Answered on Mar 12, 2019


the problem is with a electronic board, so nothing can be done by the used, the specific board need to be replaced.

Ricoh Aficio... | Answered on Mar 11, 2019


Red light all time when ink is finished and refilled it.

Ricoh Aficio... | Answered on Mar 08, 2019


Try to reset : enter in SP mode ,open the front door and turn OFF the copier.Unplugged and Wait 2 minutes ,plugged and close the front door and turn ON the copier.If is do not work your problem is in the BICU board.

Ricoh Aficio 450... | Answered on Mar 07, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ricoh Experts

gggg

Level 3 Expert

904 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Are you a Ricoh Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...