A 1/2
there are 2 possibilities
1. you have changed screen resolution by accident, try using that [right click desktop and properties, look in tabs there]
or
2.
your screen is old and it has "burned out" in some parts
I cannot get RED colour on my Relisys monitor
i will suggest to look at the connection and see if it is well plugged and also see if any of the pins on the connection is bend. try to play with the back of the connection to the monitor. move it gently side to side and if it gives you The red color it menas.
you have to be really carefully and not to move te screen very often, so the damage does not go worst. intoa shot circuit. if it is under warranty send it back for repair. other wise just keep it in one sopt and dond move it. to fix it it will be almost the same as buying a new one
Monitor goes to sleeep on lap top
Hello, you can try this... Connect your laptop with an desktop monitor throughVGA cable.... then Click on start>> goto control panel>> Double click on Power Option>> Under Power Scheme it should be Poratble /Laptop >> Select Never under System Standbye, Trun off Monitor and Turn off Hard Disk.
Thank you for contacting Fixya support, please rate if that helps!!
Hey , I jsut got
Sounds like a goofy monitor.... When you enter into a game it can change the resolution to optimize Graphics Quality and it may take a minute to render if you are on a lower end PC or Graphics Card. Another possibility is a capacitor issue, but it is very unlikely... Back light issues are common on these monitors I have heard.
When I go to my desktop after a minute or two the
This sounds like a power save issue or a screen saver problem and they are both on the same panel I will lead you to
Right click on an EMPTY part of the desktop then click properties
Click the screensaver tab then the POWER settings.
Make sure all the boxes say NEVER then APPLY.
Its up to you if you want it to ask for a password when it comes off the screensaver (my pref is for no) then click apply then ok.
When you are back at the screensaver tab change both the screensaver to one of the other windows defaults and also check how long before it goes to screensaver and maybe up that to at least 15 minutes unless you have a plasma screen in which case no more than 5 minutes.
you may need to click apply again then OK
now sit back and wait. and whilst you do that check the manual and controls for the monitor in case it too has a built in saver and if so make any changes you need there.
If you found this information useful then please click
Not finding what you are looking for?