Relisys Recent Questions, Troubleshooting Help & Support

See my tip here: http://www.fixya.com/support/r9352105-fix_colored_vertical_lines_lcd_display

the best solution is to buy a cheap set of desktop speakers. monitors have very very bad sound quality, so you will actualy notice an increase of sound quality upgrading to a cheap set of 10 to 20 dollar speakers.

Hi, welcome to FIXYA!

How may help you?

http://members.driverguide.com/driver/detail.php?driverid=12190

Your PC video resolution is too high, you need to lower it down to the native resolution of the monitor.
http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series. Please leave rating if it helps.

This isn't a solution, but a warning to anybody passing my 2nd floor flat. If no-one can come up with an answer, the ******g monitors going out the window !!

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies and Driver downloads as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

I hope this helps.

I had a similar problem with my 42 in Philips LCD HDTV.

Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors on the PSB. Many major electronics companies Philips/Magnavox, Sony, Panasonic, and others were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.

Here are some options for you.

1. Have it fixed by a professional $$$$$$$??????? (Is it under warranty?)

Remember, TVs CONTAIN HIGH VOLTAGE AND CAN KILL YOU! Do this at your own risk.

2. Open your TV and find PSB. (The board that the power cord plugs into) Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $250 right now because they are in high demand right now. They can be found online. I would definitely shop around though.

3. Remove and then replace individual faulty caps. This takes some soldering skill.

Caps are inexpensive and if you can take care of it yourself it will save you hundreds.

This may be your problem. If you determine that it might be.

I have a Tip/How TO tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. Here is the Link: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well. Let me know if I can do anything to help.

Hope this helps and if it does please rate it accordingly. Good luck.

Yes.
You will have to find out which of the many fans has failed.
I reckon it will be the fan neaest the lamp.
Clean the air ways and repair or replace the fan.
These fans have a sender unit that tells the processor when they are not rotating.
Take great care when entering the optical block!!!
Hope this helps

It sounds like there is a problem with your display cable, move around the cable that goes to the computer from the monitor and see if it changes, it sounds like your cable is broken and you might need to replace it.

nevatb, Please send the brand name(s) of the filter capacitors that are installed on the switch mode power supply/inverter ballast board. May need to replace those that "look" ok also. 12fixlouie

ps: Hope you took lots of digital pictures so you can do reassembly of unit.

right click on your monitor screen ,then go to the setting option ,,,you will found the resolution option there and you can manually set the resolution there...

http://www.12vadapters.com/

Try here: http://www.12vadapters.com/
Higher current rating is OK, actually better.