Regal Ware Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support
When I plug it in the screen shows EEE, and beeps
Hi,
The error code E:EE means the breadmaker thinks the temperature is too cool i.e
below 59 degrees F or 15 degrees Celsius.
As you say the temperature is actually 65 degrees - then this means that the temperature sensor on the Bread maker has failed and will need to be replaced.
The EEE code and beeping will continue until the failed sensor is replaced and as this is a component failure it cannot be reset unfortunately.
Thanks for using FixYa.
It make an awful screeching sound when it kneads
It sounds like your belt is slipping. Yes, just like on a car! Bread machines use a belt drive and yours is probably slipping. Your choices are to replace the belt, or replace your breadmaker in my opinion. You might want to take the bottom panel off and look at your belt and see if there is anything obvious that you can correct. If you do that be sure it is unplugged.
Replacing belt on bread machine
Where did you get the replacement belt ?
My brother is looking for a belt for a similar model K6761 which uses the same belt (I think).
It is about 24" around and 1/4" wide.
It has (3) grooves inside and the backside has many notches.
The motor has grooves, it would go on there.
Where did you get the replacement belt ?
thanks
[email protected]
Why can't remove paddle from regal pro bread maker 6725?
You don't really have to remove it at all. But pour very hot water into the pan and let it sit for about 10 mins. empty out, be careful it wil be hot then twist the blade it should come off. If not use a pastry brush and paint a little veggie oil on it.
Not finding what you are looking for?