When I plug it in the screen shows EEE, and beeps
Hi,
The error code E:EE means the breadmaker thinks the temperature is too cool i.e
below 59 degrees F or 15 degrees Celsius.
As you say the temperature is actually 65 degrees - then this means that the temperature sensor on the Bread maker has failed and will need to be replaced.
The EEE code and beeping will continue until the failed sensor is replaced and as this is a component failure it cannot be reset unfortunately.
Thanks for using FixYa.
It make an awful screeching sound when it kneads
It sounds like your belt is slipping. Yes, just like on a car! Bread machines use a belt drive and yours is probably slipping. Your choices are to replace the belt, or replace your breadmaker in my opinion. You might want to take the bottom panel off and look at your belt and see if there is anything obvious that you can correct. If you do that be sure it is unplugged.
Can't figure out how to turn on Regal LaMachine I food processor
It's very easy--but you have to know the trick--I know 'cause it took me awhile to figure it out. Place the machine with the on-off/pulse button on your left. Lock the container in place--the handle will be on your right. Put the blade on the shaft. This is the trick: Lock the lid in place so that the shoot is directly in front of you and the "***" slides into the **** on the left of the machine (between the container and the inside of the machine, left of the on-off button). Good luck!
Regal La Machine 1
If you still need the book, I might have one I can copy and e-mail to you. I'd have to look for it. No sense my looking for it and copying it if you already have it at this time. Let me know if you still need it.
[email protected]
I have a Regalware 55
It's an Inter Control type 161-491 Discomelt Plus thermal protection device. The 250°C bimetal disc switch failed, so the 318°C thermal fuse opened. West Bend uses the same device. They are readily available online as part # P200-97.
Not finding what you are looking for?