Question edited for clarity.
Question moved to RCA Microwave Oven.
https://www.manualslib.com/manual/799513/Rca-Rmw1108.html?page=13#manual
Page 13 of the manual states
11. When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
Further investigation shows it has a fancy WIFI dimmable LED Bulb. Such things normally come as a module, so not just a case of unscrewing a bulb, however, this seems not to be true.
DIMMABLE SMART WI-FI LED BULB A19 BULB · Air treatment · Air conditioners ... 1.1 CU FT STAINLESS STEEL DESIGN MICROWAVE RMW1108. Compare. Discover more. Features.
Having said that, this is an A19 Bulb
Home Depothttps://www.homedepot.com > ... > LED Light Bulbs
Get free shipping on qualified A19 LED Light Bulbs products or Buy Online Pick Up in Store today in the Lighting Department.
Look on the sides and back for a small inspection door. At the corresponding place on the inside, should be an opaque cover where the light shines into the cavity. The inspection door normally has a single screw, remove it and unscrew the bulb. Replace with a new bulb and re-fix the door. An easy 5 minute job. Let me know how you get on by clicking Comment under my answer.
Adding Bluetooth functionality to a Rock-Ola 55015-1A Amplifier involves a few steps and considerations to ensure compatibility and proper functionality. Here's a general guide on how to add Bluetooth to your Rock-Ola 55015-1A Amplifier:
1. Gather the Necessary Equipment:
The HDMI to RCA cables are intended for A/V devices like projectors that understand how to translate the digital signal to an analog signal. Your amplifier will not be able to do this.
What make/model TV do you have? I don't know of any with HDMI outputs. Most only have HDMI inputs. What is your TV source (OTA/cable RF, set-top box, streaming device)? Does your TV have any audio out (digital audio output - fiber-optic or coaxial)?
If you have an HDMI source, you could use an Audio Extractor. See https://www.amazon.com/HDMI-Audio-Extractor/s?k=HDMI+Audio+Extractor . You probably will need an extra HDMI cable and depending on the model either an RCA audio cable or a AUX to RCA cable. Plug in the source to the extractor's HDMI In, connect the HDMI Out to an HDMI input on the TV. Connect the extractor's analog audio output to one of the Yamaha AX-396 Audio IN connections. Connect the power adapter to the extractor and plug it in. Then turn on all of the components of your home theater system. (Probably you won't need to connect the HDMI out of the extractor back to the TV if your TV does have an HDMI out.)
If your TV has a digital audio output, you could use a digital to analog audio converter. https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 lists some options. Again you may need to purchase extra cables. Not all models are sold with the needed cables.
I hope this helps.
Cindy Wells
(note: you can expect any converter to have signal loss.)
The sort of greeting that shows 'Hello and Welcome to RCA World of Audio' or similar on start up? That is an inbuilt feature and can't be turned off. The manual shows no Reset and no Greeting using using the Manuals Library search feature.
The manual gives no clue as to whether there is a fuse as the rear, but look for a screw out or pull out strip depending on country. Also check the wall plug with a device known to work.
To do a search for the specific battery would require the battery number, something accessible only by disassembly of the tablet, unless RCA customer support would be of assistance. https://www.rca.com/us_en/after-sales-service-288-us-en
It would appear likely to be a type of 4 Ah battery. I just don't find a webpage that tells me the battery compatible with this tablet. Amazon sells such for several models of RCA tablets but does not list your specific model. Perhaps this resource would be of help: https://batteryclerk.com/collections/tablet-batteries/brand_rca
You can try Googling "Disassembling RCA RTC6272W23 Case" to see if such is a close enough match if you choose to give it a go to get to the battery yourself and discover its identification.
Sure, here are some possible things you can do if your RCA DVD Recorder+VCR Combo DRC8320N is not working:
Check the power cord. Make sure that the power cord is plugged in securely and that the outlet is working.
Reset the DVD recorder. Unplug the DVD recorder from the power outlet for 30 seconds, then plug it back in.
Try a different DVD. If you are trying to play a DVD, try a different DVD to see if that works.
Clean the laser lens. The laser lens is responsible for reading the DVD discs. If the laser lens is dirty, it may not be able to read the discs correctly. You can clean the laser lens with a soft cloth and some isopropyl alcohol.
Replace the laser assembly. If the laser lens is damaged, you may need to replace the laser assembly.
Take it to a repair shop. If you have tried all of the above and the DVD recorder is still not working, you may need to take it to a repair shop.
Here are some safety guidelines to keep in mind:
Do not attempt to open the DVD recorder yourself. This could void the warranty and could also be dangerous.
Do not use any chemicals or solvents to clean the DVD recorder. This could damage the components.
If you are taking the DVD recorder to a repair shop, be sure to pack it carefully. You do not want to damage the components during transport.
Question edited for clarity.
You state "I tried to play my DVD player in the AV output". It should be the AV Input not the Output on the television. Ideally you should be connected by an HDMI cable!
You need to do a Factory Reset. That should bring back the Default code.
It could be due to wornout or broken belts,the VCR uses belts to operate various the mechanical components.If the belts are damaged the machine may stop playing tapes.
It can also be an electrical problem,if there is an issue with the the electrical components of the machine such as power supply or circuit board.it may cause the machine to stop playing tapes
The RCA Model # 8530 appears to be a stereo receiver, which means it does not have the capability to directly burn a CD from a tape.
To convert a tape to a CD format, you would typically need a separate device called a cassette deck with a built-in CD recorder or a computer with the appropriate hardware and software.
If you have access to a cassette deck with a CD recorder, you can connect the RCA Model # 8530's tape output to the input of the cassette deck and then use the cassette deck's CD recording function to transfer the audio from the tape to a blank CD.
If you have a computer, you can use an analog-to-digital converter to connect the RCA Model # 8530's tape output to the computer's audio input. You can then use audio recording software on the computer to capture the audio from the tape and save it as a digital file. Once you have the digital file, you can use CD burning software to create a CD from the captured audio.
It's important to note that the specific steps and equipment required may vary depending on the exact models and setup you have. It's recommended to consult the user manuals for your devices and, if needed, seek additional guidance from the manufacturer or a knowledgeable audio technician.
Bad connection in the plug, bad grounding \ shielding on the wires and plugs. Pull the plugs one at a time until the hum stops. That identifies the lead. Check plugs and also if the wire is proximity to another EMI source. It can even be a fridge in the next room, so start turning off appliances.
RCA is now generally considered as an old, rarely used system so most new stereo systems and TV's don't have them fitted. If there are parts missing from the setup you're trying to connect there is a good chance you won't be able to connect it to anything. New replacement systems can be reasonably cheap and much easier to connect to modern stereos and TV's.
Question edited for a lot more clarity, written English and, full 'make model (what it is)'.
Question moved to model category.
Try a power reset. Disconnect from the mains for 10 minutes, press and hold the unit On button and plug back in. Continue to hold for 12 seconds.
If that doesn't fix it you need an audio technician, or a new one.
It seems like you've tried various connections and settings to get your JBL135 subwoofer working with your Kenwood receiver, but you're still facing issues. Let's break down the situation and provide some recommendations:
Subwoofer Connection:
Using the LFE/Subwoofer Out: This is the preferred method for connecting a subwoofer. Ensure that the cable is firmly connected to both the subwoofer's LFE input and the receiver's Subwoofer Out port. Make sure you have enabled the subwoofer output in the receiver's settings menu.
Subwoofer Settings:
Gain: Adjust the gain knob on the subwoofer to achieve the desired bass level. Experiment with different settings to find the right balance.
Crossover: Set the crossover frequency on the subwoofer to blend with your tower speakers. Start with a conservative setting, such as 80Hz, and adjust as needed.
Receiver Settings:
Speaker Configuration: Set your tower speakers to "Small" in the receiver's settings menu to redirect bass frequencies to the subwoofer. This ensures that the tower speakers are not trying to reproduce deep bass.
Bass Management: Enable the appropriate bass management settings in the receiver's menu, which typically includes crossover frequency and speaker size adjustments.
Check Subwoofer Cable and Port:
Ensure that the subwoofer cable is in good condition and securely connected to both the subwoofer and receiver.
Try using a different cable or testing the subwoofer with another receiver if possible to rule out cable or port issues.
Factory Reset:
If you've exhausted all troubleshooting steps, you may consider performing a factory reset on your Kenwood receiver. This will reset all settings to their default values, potentially resolving any configuration issues.
If none of the above suggestions work, it's advisable to consult the user manual for your specific Kenwood receiver model or contact Kenwood customer support for further assistance. They can provide more detailed guidance based on your equipment and setup.
