RCA Lands Phones - Answered Questions & Fixed Issues
My speakerphone doesnt work on my 25423re1-a ,but my handset does work ? how can i fit it , thanks Ben Brazzell
Ensure that the speakerphone feature is not disabled. Some phones have a dedicated button or an option in the phone menu to enable or disable the speakerphone. Look for this option and make sure it is turned on.
Or Reset the phone to factory settings. Refer to the user manual of your 25423RE1-A phone for instructions on how to perform a factory reset. Keep in mind that this will reset all settings and may delete any personalized configurations.
How do I turn off a second alarm on the RCA Digital PLL radio model RP3711A?
To turn off the second alarm on the RCA Digital PLL radio model RP3711A, follow these steps:
1. Press and hold the "Alarm 2" button on the top of the radio until the display shows "OFF."
2. Release the button.
3. Press the "Alarm Set" button to confirm that Alarm 2 has been turned off. The display should no longer show the time and alarm settings for Alarm 2.
If turning off Alarm 2 using the above steps doesn't work, you can try resetting the radio to its factory settings. To do this, follow these steps:
1. Unplug the radio from the power source.
2. Remove the backup battery from the radio.
3. Wait at least 30 minutes.
4. Reinsert the backup battery and plug the radio back in.
5. Set the time and alarm settings again.
Regarding the manual, the model RP3710 and RP3712 may have similar features and operation, but it's best to refer to the manual specifically designed for your radio model RP3711A to ensure that you are following the correct instructions. You can usually find the manual online by searching for the model number on the RCA website or on other electronic manual databases.
Voicemail messages
If someone leaves me a message and I hit the play button it says no messages.
I am having the problem that when I pick up my
Hello Katy244,
Not likely (but possible)
You could try phoning your number... to see if anybody ANSWERS ((ask if they have any messages for you))...
Ringing current is MUCH BIGGER
than "
TALK BATTERY".
I suspect if you take YOUR phone over... from whence the other came...
It will work over there...
If these are actually "corded" you have to realize
those cords EXTEND (in pairs... two wire) an average of three miles back to a
CENTRAL OFFICE where the
LINE EQUIPMENT provides the
dial-tone.
Here in the
USA a 611 code...
(dialed from any WORKING LINE)
Is all you need to call to REPORT your trouble.
Any break in those miles of wires (Rodents, birds.
automobiles... Kids with wire cutters... (etc.) can open
those wires... Even the EQUIPMENT has been known
to fail at the CENTRAL OFFICE... or the ever popular
"WORK ERROR"...
Just call your telephone Company and report the trouble...
If the trouble is NOT ON YOUR PREMISES...
the "SERVICE call should be
FREE"
Carnac the Magnificent
https://www.customerservice.att.com/assistance/faq/qa.jsp?faqCategoryId=local_report_faq
10/25/2017 11:17:27 AM •
RCA Thompson...
•
Answered
on Oct 25, 2017
•
60 views
How do I check L1 message waiting
I had the same issue on my RCA 25255re2 and worked with customer service at RCA. They had me hold down the delete button for 5 seconds, release the delete button, then press delete one more time. That cleared the phantom L1 message waiting issue we were having at my office
4/13/2016 6:23:48 PM •
RCA Lands Phones
•
Answered
on Apr 13, 2016
•
3,622 views
HOW TO USE THE CALL FORWARDING
- Dial *72 (or 1172 on rotary phones).
- Listen for three beeps followed by dial tone.
- Dial the phone number to which your calls are to be forwarded.
- If there's an answer at the number you are forwarding to: Make sure you keep the line open for at least 5 seconds to activate the service.
I have RCA Dect 6.0 two handset keys locked on one. How do I unlock keys
Keypad lock To lock the cordless handset?s keypad: Press and hold [*] button for 2 seconds until you hear a beep tone, when the keypad lock is activated, shows on the display. To unlock the keypad: Press and hold [*] button for 2 seconds until you hear a beep tone. Or simply replace the handset on the charger cradle.
I'd put it back on the charger and see if that unlocks it.
Not finding what you are looking for?