Razor Health & Beauty - Page 3 - Popular Questions, Answers, Tips & Manuals
No power from control arm to chair
If your Dalton Primechair is not receiving power from the control arm, there could be several reasons for this issue. Here are some troubleshooting steps you can take:
Check Power Source:
Make sure the chair is plugged into a working power outlet.
Check the power cord and ensure it is securely connected to both the chair and the electrical outlet.
Power Switch:
Verify that the power switch on the control arm is in the "ON" position.
If there is a separate power switch on the chair's body, ensure it is also turned on.
Batteries (If Applicable):
If the chair uses batteries, check if they are properly installed and functional. Replace the batteries if necessary.
Remote Control (If Applicable):
If the chair comes with a remote control, ensure that the batteries are installed correctly and that the remote is functioning.
Fuse:
Check if there is a fuse in the power supply line or within the control arm. If the fuse is blown, replace it with a new one of the same type and rating.
Wiring Connections:
Inspect the wiring connections from the control arm to the chair. Look for any loose or disconnected wires. Reconnect any loose wires securely.
Faulty Control Arm or Power Supply:
If none of the above steps resolve the issue, there may be a fault in the control arm or the power supply system. Contact the manufacturer's customer support for further assistance. They may provide guidance on troubleshooting or recommend professional service.
User Manual:
Refer to the user manual for troubleshooting tips and specific instructions related to the Dalton Primechair.
If you are unable to resolve the issue with these steps, it's advisable to seek assistance from the manufacturer's customer support or contact a professional technician who is familiar with the specific model of your chair.
How to recalibrate a digital food scale
They are not normally capable of recalibration. You need a very special certified calibration weight. They are done at the factory and that is it. As long as the scale is on a flat level, firm surface they should be good.
Full 'make model (what it is)' in all questions please. We can search and see if it is a known issue and if the company are recalling them.
How to get battery out of weight scale please?
Postal scale, bodyweight scale, kitchen scale, every scale ever made?
Turn it over, look for a door or a screw, unless it is the only Taylor Scale that has a sealed for life battery and is not replaceable.
'make model (what it is)' in all questions, first 3 words please.
..
Joy stick power stays off when charged
If the joystick on your power wheelchair remains inactive even after charging, several issues may be at play. First, check if the charging process completes successfully, ensuring the battery is fully charged. If the joystick power persists to stay off, examine the joystick's connections and cables for any damage or disconnection. Additionally, inspect the battery terminals, ensuring they are clean and secure. If these steps don't resolve the problem, it may indicate a malfunction in the joystick itself, requiring professional diagnosis and potential replacement. Consult the wheelchair's user manual for specific troubleshooting steps or contact the manufacturer's customer support for guidance.
How do i repair leg massager?
Repairing a leg massager depends on the specific issue it's facing. Here are some general steps you can take to troubleshoot and potentially repair a leg massager:
- Check the Power Supply:
- Ensure that the massager is properly plugged into a working power outlet.
- If it's battery-operated, make sure the batteries are charged or replace them if necessary.
- Inspect the Power Cord:
- Examine the power cord for any visible damage or fraying. If you find any issues, you may need to replace the cord.
- Review the User Manual:
- Refer to the user manual that came with the leg massager for troubleshooting tips and instructions.
- Test Different Modes and Settings:
- If your leg massager has various modes and settings, test each one to see if the issue is specific to certain functions.
- Check for Obstructions:
- Ensure that there are no obstructions preventing the massager from functioning correctly. Sometimes, foreign objects can get caught in the moving parts.
- Inspect Mechanical Components:
- If you're comfortable doing so, open the massager (if possible) and inspect the mechanical components. Look for any loose or broken parts. Be cautious not to void any warranties.
- Look for Loose Connections:
- Check for loose wires or connections inside the massager. Reconnect any that may have come loose.
- Contact Customer Support:
- If your leg massager is still under warranty, contact the manufacturer's customer support for assistance. They may provide guidance on troubleshooting or offer a replacement.
- Professional Repair:
- If you are unable to identify or fix the issue yourself, consider taking the leg massager to a professional technician or contacting the manufacturer for authorized repair services.
Where can i buy blades for 2 speed us 9098
Are these blades broken or just blunt? Can you comment below with a photo of the blades you have? Some of the blades on these machines can actually be re-sharpened. A fine file or a small sharpening stone can put an edge back on them. A little bit of time and effort and you don't have to go parts hunting for a few more years.
Mobility scooter mayfair 8 green light flashes 9 times
You have two 12 volt batteries for a total voltage of 24 volts. Your green light is blinking because your total voltage has dropped to about 16 volts at the controller. If the connectors to the battery are not loose, perhaps there is a problem with one of the batteries.
Not finding what you are looking for?
