Raymarine Boating - Page 7 - Recent Questions, Troubleshooting & Support

You can find very good new and used Raymarine equipment on Ebay for about 1/2 the price of retail.

Try going to the Raymarine.com website to find the appropriate user manual. There might be a troubleshooting guide in the back.

Go to Raymarine.com for detailed installation and user manuals for your Raymarine electronics.

Go to the Raymarine.com website, they have manuals for their products even ones that have been discontinued.

Verify that it is configured for your installation. Some units can be installed either on the port or starboard side, and they have to be programmed accordingly. Verify this in the user's manual.

Sounds liek the seal is not seated properly. If it is new and leaking, take it back and ask for a repair/replacement. There should be a warranty in place.

Go to Raymarine website and look under Technical Support, Manuals and documents. All of their product manuals are listed there.

Go to Raymarine website and look under Technical Support, Manuals and documents. All of their product manuals are listed there. If you are burning out the transistors, it sounds like you are puting too much load on the auto pilot.

Go to Raymarine website and look under Technical Support, Manuals and documents. All of their product manuals are listed there.

It has been a while since I set up my auto pilot, but Raymarine has a very good set of on-line manuals and it would be a good idea to go through the setup procedure again. There is a sensitivity setting that adjusts the responsiveness of the AP in relation to changes in the helm. If it is set too sensitive, the AP will make big changes when the helm slightly moves.

Blue should be positive. Is there no way you can trace it back?

Ebay would be a good source for replacement cables.

yes no compass

standby means sleep mode

do you have the radar receiver or you just clicking on radar and wondering why you cant see it