Ranger Radio Communications - Recent Questions, Troubleshooting & Support


check out the schematic first .It may be the same wiring .

Ranger Radio... | Answered on Oct 03, 2018


Your radio needs an alignment to bring it back to specs . Check all the frequencies according to the manual and have a tech tune it for you .

Ranger Radio... | Answered on Oct 03, 2018


Check the fuse. Blowing a power supply does not happen. Blowing a fuse often does. If the power supply truly went out, it is too small in amperage. More information on the power supply may help.

Ranger... | Answered on Feb 02, 2018


Channel list.

There you will find a list of the citizens band frequencies.

Ranger... | Answered on Jul 10, 2016


If you want to talk on AM put it on AM if you want to talk on SSB then put it on SSB. Did you recently purchase this radio? You do realize you need a ham radio license to use this ?If you are on the upper ham bands you better have a license or they will come and get you .Look at the the dial that has 1 - 7 on it. Now take the owners manual and look at the diagram of the knob . It should say something about frequencies and the frequency you need to operate on is from 26.965 to 27.405 MHZ .

Ranger Radio... | Answered on May 06, 2016


on the back of the cpu behind the frequency counter display. you will see the pins sticking out

Ranger Radio... | Answered on Jan 10, 2016


toshiba ta-7222ap (8 leg IC on side of chassis same side as volt reg and power plug)

Ranger... | Answered on Jan 10, 2016


its the round dime sized battery on the back of the cpu inside (back of faceplate) there is an battery upgrade. www.cbtricks.com

Ranger... | Answered on Jan 10, 2016


The + side of the cell is smooth on the top (no seam), and the - side has a seam going all the way around it as shown below:


25916148-r0yzlqghevn4wmvg3zw5spzn-3-0.jpg
This side ^ is (+) and this side ^ is (-)

Ranger Radio... | Answered on Oct 20, 2015


ship to shore communication and weather reports.

Ranger Radio... | Answered on Oct 01, 2015


Do like I just did,Google it and your answer will be an affirmitive YES.

Ranger Radio... | Answered on Oct 01, 2015


frequency drifting on last number really doesn't make much difference. Lets say you are on CH 1 26.965 and the counter says the frequency is 26.9648 . Its not right but it close enough that its not going to make a whole lot of difference .Signal meter not working is not a problem either . You have to check the schematic for what voltage operates the meter,check to make sure that voltage is there. If it is then you should change the meter., if no voltage then you should check for the solution as to how to get it back. When the radio warms up and you hear people talking take some freeze spray and give the audio IC a shot to see if it still works or not .

Ranger... | Answered on Aug 05, 2015


take it to a tech , if you have to ask then you are not able to work on it . It is definatly an internal problem.

Ranger Radio... | Answered on Jul 17, 2015

Not finding what you are looking for?
Ranger Logo

204 questions posted

Ask a Question

Usually answered in minutes!

Top Ranger Radio Communications Experts

Mike Charette

Level 3 Expert

1847 Answers

normis101

Level 2 Expert

65 Answers

Robert McClure

Level 2 Expert

161 Answers

Are you a Ranger Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...