Quorum Recent Questions, Troubleshooting Help & Support

If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls.

There are places that sell the whole thing. Just a remote wont be available and you will have to replace the receiver in the fan unit.

-one has a tiny screw on each side of the clip-on that's on rear of the alarm--for that one just remove the 2 tiny screws, carefully remove the back side and the rubber sealer. another comes WITHOUT the 2 tiny screws--merely take small flat end of screwdriver and pry off

What's the problem? If you need a manual call Quorum @1-800-443-4626

With the power off, inspect the socket and see if the contacts have been pressed down. You can bend them back up slightly using a small tool. Make sure you do not handle the halogen bulb with bare hands/fingers. The oils in your hands will case the bulbs to fail. Use a cloth when installing a bulb.

Call Quorum at 1-800-443-4626

You need a new remote receiver.

first of all if you bought a switch at a store, just because it looks the same on the outside doesn't mean it's the same on the inside. I can tell you that the black wire usually goes into the L. If you can't find the correct switch contact me at. [email protected]

It was an add-on remote so it really depends on the receiver. Locate the receiver, probably in the canopy cover at the ceiling, and see if it has 4-5 dip switches. If so, just change the settings by changing one of them, by pushing it up or down. Now, open the battery compartment of your transmitter and match the setting you just did to the receiver. BOTH have to be set on the same frequency.

Your best option maybe to contact Quorum International directly and provide the details of the problem including model number of your fans. Quorum International manufacturer of designer coordinated lighting...

Pull chains are pretty generic; pull it apart and replace