How do I install a boiler flue
If you are installing a new boiler, there will be detailed instructions within the installation booklet shipped with the boiler. Being high efficiency, it sounds like it will be vented with pvc pipe. If so, it could be either a one pipe or a two pipe system. Make sure you follow specifically the instructions concerning the slope of the flu as there will be some moisture condense inside the pipe. Most manufacturers recommend a minimum fall in the horizontal runs BACK to the furnace, some do not.
There should never be a 'sag' in the horizontal runs caused by supports spread too far apart. The two pipe system draws combustion air from outside the home and minimizes any chance of negative pressure in the case of an extremely tight home. That negative pressure is usually never an issue for a normal home, because of leakages around doors and windows and the normal opening and closing of the doors on a routine day.
Again, follow the instructions provided with the boiler and there will be no problem.
11/30/2014 12:41:24 PM •
Quietside...
•
Answered
on Nov 30, 2014
Qshx mini split heat pump leaking
You are going to have to give a lot more information. What is leaking, how fast, etc. If it were the refrigerant you would be out by now. Where is the leak coming from.
5/1/2014 12:06:28 AM •
Quietside...
•
Answered
on May 01, 2014
Not finding what you are looking for?
