Quad Cycling - Popular Questions, Answers, Tips & Manuals

The model number and serial number on your Kawasaki Engine is located at the rear of the engine on the engine housing

If there is no obvious connection, it may just be a breather hose for the engine.

Need a new battery

Here is a Suzuki forum talking about your tire problem. https://www.suzukiatvforums.com/forums/wheels-tires/1339-tilted-rear-tire.html

Depends on size, load and usage. Check side of tire or manufacturer's info/website. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Google the make/model, or put in motorcycle area, not bikes. I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Here is the detailed link. Watch it.

try this link and try ebay for the pull start. https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=skyteam+st+40+kiddies+quad+bike+and+a+workshop+manual

All you have to do is Google "assemble chad valley quad" to find videos. One of these should work: Redman and Associates 12V Quad Bike Assembly 6v Large Quad Bike assembly instructions I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Hi, I do a lot with these bikes, I think if you are getting a weak spark there is a couple things to check. First, do you understand how it builds the power to create the spark? The magnet in the flywheel has to be very close to the magnito or coil, if the gap is too much it will cause a weak spark, if the magnet is weak, weak spark, if the coil is shorting internally, weak spark. If the plug wire is damaged, weak spark. I hope this helps you.

It is possible. What you do is eliminate the unit and all the wires and wire the engine direst to the kill switch You need power to the coil from the kill switch, that's all. the second wire is ground, or depending on the design the kill circuit may be the ground side of the circuit. in any case the wire on the coil is positive power. you should find it fairly simple to eliminate the remote system if you think of basic requirements for the machine to run. Most remotes simply cut the power off. You will definitely need to connect 2 of the wires together. Judging from your pic I would cut all the wires and connect same color wires together.

If you have replaced the spark plug then the possibilities are the ignition coil is weak or the starter mechanism is faulty. See this site for details of parts. Mini Atv Quad Parts 47cc 49cc Stock Replacement

AT your KXD dealer check on ebay or amazon for another source

Keep looking. If I had one would give it to you

take serial number to motorcycle repair shop

Contact local atv dealer for assistance

I would eliminate the remote system. Cut all the wires going to it and connect the same color wires together. don't worry about the black wire.

bad cable. contact local atv dealer for repairs

what you do to find it is remove the spark plug and put your finger over the hole. slowly turn the engine over until you feel the air blowing past your finger. Then look in the hole, you will see the piston coming to top dead center.

you need to open the screw on the carberator prolly a 1/4 turn