Qep Saws - Recent Questions, Troubleshooting & Support
83200 tile saw wire diagram
eddie,Thank you for asking me to help you with your problem. However, this is either not within my level of expertise or the question is unclear or there is not enough information and I cannot help you at ths time.
Where do you put the water?
Most wet saws have a water tray below the table area. The blade moves thru this tray and gets cooled and lubricated by the water
What direction for blade rotation
The top of the blade spins toward you, but maybe you are asking which way the blade should go? If this is a tile saw, the teeth are tiny bits of diamond and will work in either direction. If this is blade with visible teeth, as for cutting wood, the points of the teeth should be toward you on the top of the blade. Good luck.
Cuts are bowed
I heard that the rod that it rides on, may be bent. This is the rod, that you normally adjust, to get your straight cut, parallel to the blade. One mans solution was to turn the rods, so the bend of the rod, was vertical, rather than horizontal. You may want to look into ordering new , hopefully straight rods, from QEP too.
Not finding what you are looking for?