Q-Tec Recent Questions, Troubleshooting Help & Support

Hello you can download the driver here:http://www.qtec.info/service/support/drivers.htm.1657.htmlBut windows vista and windows 7 is not supportet.Good luck

1. 1st You download Webcam Driver.
2. Q-Tec 310 Web Cam Driver
3. After this install the Webcam driver in the system.
4. Installation of Webcam Driver
5. Go to the control panel
6. Click on the System Icon
7. Click on the Hardware Tab
8. Click on the Device Manager s
9. Select the Unknown Device or printer device where yellow Question Marks sign on it.
10. Right click on it and uninstall it.
11. After this go to the top of the device manager and click on scan for hardware changes.
12. Driver installation Wizard start.
13. Brows Your Driver from the Hard Disk and click on next.
14. Driver will be install.

Download one of the following drivers. Choose the operating system you're using:

- Windows XP
- Windows ME
- Windows 98
- Windows 2000

If your OS is not listed above then it's not supported. If you're running Windows 7, download from any link and run in compmatibility mode. You should be ok.

Hope this helps.

http://www.drivershq.com/Drivers/XPDevices/Q-tec-Webcam-310-USB-Device-Driver/161680/Drivers.aspx

??????

You can go here and download drivers for you OS you can also click on home and get the phone number if you want to order the CD

If it works for you, don't forget to rate me

thx

Reinstall and follow the configuration setting instructions.

If you are running win xp here's the link
http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/OTHER-SCANNERS/Q-Tec-Webcam-310-USB-Driver-4750.shtml
just click download button nothing else.
Mark