Python Recent Questions, Troubleshooting Help & Support

The valet switch/programming button is incorporated into the antenna on the windshield.

you will have to overide the system with your valet switch, its either a bad brain or bad antenna, its a common issue with viper

The lock button in your remote may be faulty.

What is your question about the button ?

You may have lost the memory or the battery is dead(might be) or incorrectly installed. Sometimes you have to check the little contacts to for proper tension against the correct points of el trans.

SOMETHING IS AJAR OR THE CANCEL BUTTON IS BROKEN ON ONE OR MORE OF THE DOORS OR HATCH. SEE THAT EACH ONE IS IN PLACE AND CANCELS THE COURTESY LIGHTS

You can either go to directed.com or if you still have the old broken transmitter you can input the FCC Id from the remote to remotesunlimited.com and they sell replacements with program instructions as well.

2001 chrysler remote wont let me start my car help

Check for other ground wires. That's the cause of most problems. Clean Battery post (+ and -) and trace them as far back as you can making sure they are tight and clean. Check fuses, make sure wires are tight on the starter. If that does not work take and unplug every wire on alarm itself. If she moves the seat up check near the brake pedal and look for bad connetions.

check on ebay or go to the alarm store some remotes can be purchased at part stores

did you program the wireless key fob into the system?