Pyle Recent Questions, Troubleshooting Help & Support

may be the set up .

What do you have plugged into it? Or is it the speaker alone?

Could be the main board / water damagen& corrosion / could need a replacement screen digitizer!
Look on ebay
Good luck
Lozza G

You want to verify your wiring first. Use a volt meter to make sure the power and ground are good. You can jump the + to the Remote to bypass the head unit(after unhooking the remote wire). If at any point you had your speakers short out or wires hit together it will have smoked your power supply and damaged it internally. If you end up verifying the power and remote are working right and there is still no amp turn on, measure the fuse for resistance. Should be 0 ohms. If the fuse is good, the power/remote are good, then the amp is internally damaged. Any number of things could be wrong. Good luck

Your GPS system has to have updated maps. Go to http://www.pyleaudio.com/Home.aspx and contact them about map updates to your system. If you bought your system from a supplier, THEY should have made sure your system had updated maps for the area in which you purchased it.

If it’s an active sub change you plug point and check, also try the power button on the sub by clicking it once or twice