Puma Logo

Puma Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 137 Products
  • 183 Answers
  • 29K Views

The motor will run hot/overload if wrong size or too long cord is used. Also if pressure is set too high (most set at 125 ~ 135 at shut-off). In-tank checkvalve will also have effect on motor by loading the compressor at start-up. Easy test. Run compessor till you have over 100lbs in tank then unplug from power. At this point try to turn the motor /pump by hand, it should turn rather/very easily (this test is hard to do if the motor /pump is completely enclosed, you need to be able to turn the pump even if by truning the fan blade). If it does not turn easily let all the air pressure out of tank and then try to turn by hand. If it turns easily with tank empty try one more test. Run compessor till the pressure switch turns it off. Then unplug machine and turn compessor again by hand, should be easy. If not easy then unloader / checkvalve not working. The checkvalve could be leaking air back from the tank loading the pump. Replace parts as needed.

Puma Air Tools &... | Answered on Apr 01, 2011


Dont have that particular watch, but try this.



Setting the time on the PU910222003 Puma ladies watch.

The process is actually less complicated than you would think.

First, a couple things you need to know and remember.

1. The watch has a safety feature which requires you to press the touch button on the right side of the watch before you can do anything as far as touching and changing anything. If it did not, every time you accidentally touched the dial something would change.

2. Touch means you are touching the dial and the (stones or outer edge)


To change the time, day, date etc, on your PU910222003 you must first press the touch button on the side. The word touch will light up (display) inside the watch on the right side of the dial.

Now you are ready to change stuff.

Touch the dial and the little what looks like bling at the bottom of the watch. You need to be touching the watch dial and these stones at the same time to do anything we are about to do.

While touching and holding the bottom of the dial you may see the back light turn on.

That is actually how you do that.


By continuing to touch and hold the bottom of the dial, you will then see the word hold at the top and then the hour of the time flash.

To increment the time or decrement the time, touch the right side of the dial or the left side of the dial. When you have arrived at the current hour, touch the hour at the top again and the minutes will begin to flash.

Continue to set all settings in this manner until you are satisfied. Touching the top to move to the next setting and right or left of dial to go up or down.


When you are done. Touch the bottom of the dial to exit this setting mode.


Day to day use,

Touch the time at the top of the dial to scroll through the time, chrono, alarm etc. To see time if the screen saver is on, touch the left side of the dial. Touching this repeatedly will also scroll through all the phrases programmed into the watch.

While touching and holding the bottom of the dial you will see the back light turn on.


Cool feature,

This watch actually has two displayable times you can use if you travel often to a second time zone. Press the touch button on the side and touch the right side of the dial. Touching it for a second or two will display the time of the second time zone. Touching and holding for a couple more seconds will cause the T2 on the display of the left side of the watch to flash and eventually switch to the second time. I am thinking that touching the bottom of the watch while displaying the second time should allow you to set this time also.

Puma Active... | Answered on Mar 07, 2011


Dont have that particular watch, but see if this works.

Setting the time on the PU910222003 Puma ladies watch.

The process may be less complicated than you would think.

First, a couple things you need to know and remember.

1. The watch has a safety feature which requires you to press the touch button on the right side of the watch before you can do anything as far as touching and changing anything. If it did not, every time you accidentally touched the dial something would change.

2. Touch means you are touching the dial and the (stones or outer edge)


To change the time, day, date etc, on your watch you must first press the touch button on the side. The word touch will light up (display) inside the watch on the right side of the dial.

Now you are ready to change stuff.

Touch the dial and the little what looks like bling at the bottom of the watch. You need to be touching the watch dial and these stones at the same time to do anything we are about to do.

While touching and holding the bottom of the dial you may see the back light turn on.

That is actually how you do that.


By continuing to touch and hold the bottom of the dial, you will then see the word hold at the top and then the hour of the time flash.

To increment the time or decrement the time, touch the right side of the dial or the left side of the dial. When you have arrived at the current hour, touch the hour at the top again and the minutes will begin to flash.

Continue to set all settings in this manner until you are satisfied. Touching the top to move to the next setting and right or left of dial to go up or down.


When you are done. Touch the bottom of the dial to exit this setting mode.


Day to day use,

Touch the time at the top of the dial to scroll through the time, chrono, alarm etc. To see time if the screen saver is on, touch the left side of the dial. Touching this repeatedly will also scroll through all the phrases programmed into the watch.

While touching and holding the bottom of the dial you will see the back light turn on.


Cool feature,

This watch actually has two displayable times you can use if you travel often to a second time zone. Press the touch button on the side and touch the right side of the dial. Touching it for a second or two will display the time of the second time zone. Touching and holding for a couple more seconds will cause the T2 on the display of the left side of the watch to flash and eventually switch to the second time. I am thinking that touching the bottom of the watch while displaying the second time should allow you to set this time also.

Puma Active... | Answered on Mar 07, 2011


Quality Shoe Repair & Upholstery
18 reviews Rating Details

Category: Washington, United States Local Services Shoe Repair Shoe Repair [Edit]
1963 Calvert St NW
(between N Biltmore St & N Cliffbourne Pl)
Washington, DC 20009
Neighborhood: Adams Morgan
(202) 332-0056

Puma Clothing... | Answered on Feb 02, 2011


see

here


did it solve your problem?

Puma Bracelets... | Answered on Jan 19, 2011


I have examined their web site but they do not list manuals.

Their customer service site sounds as if they would be only too pleased to help you on this.

Try going to http://www.shop.puma.com/Contact-Us/CONTACT,en_US,pg.html and e-mailing them about your problem. They should be able to send you a copy.

Puma Watches | Answered on Dec 27, 2010


This is a Taiwanese company and their web site leaves much to be desired - I was unable to get the manual for you but I did get an email address for you to possibly get it from;:sales@pumaair.com . I'm sorry I couldn't find more for you but here is the web address in case you need it; http://pumaair.com/english/products.php3 . I hope this helps!!

Puma 1Gallon... | Answered on Dec 15, 2010


With pressure in tank test for leak at the check valve. Follow the discharge line from the pump to the tank. There you will find the checkvalve (usually brass valve). If the check valve leaks the compressor will be under load when motor tries to start and will probably trip breaker. Look for reset button (red button )on the compressor motor and push-in to reset. With pressure in tank the motor /pump should turn freely by hand. If checkvalve good and unit turns freely, test capacitor for proper valve. It should test to within 95% of printed uf/mfd. Good holidays

Puma Air Tools &... | Answered on Dec 15, 2010


mindandirikada!

Puma Watches | Answered on Nov 30, 2010


Hi, my name is John. Welcome to FixYa. You can get it here. www.mastertoolrepair.com . Thanks for choosing FixYa...John

Puma Air Tools &... | Answered on Nov 29, 2010


Press and hold the button on the upper left until it displays "HOLD" then wait 'til the light goes out, you'll see the hour-digit blinking, set the hour you want, then for the minutes, press the lower left button. Press and hold the upper left button to set the desired time.

Puma Digital... | Answered on Nov 25, 2010

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Puma Experts

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

John Trevino

Level 3 Expert

1407 Answers

Lawrence Oravetz

Level 3 Expert

10528 Answers

Are you a Puma Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...