Proscan Televison & Video - Recent Questions, Troubleshooting & Support

Bad caps on power board

Proscan... | Answered 20 hours ago

Open internal fuse or power supply failure

Proscan... | Answered on Jan 12, 2019

You may have power supply DC filter caps problem, that will be the first place to look.
If you are going to DIY and have proper tools and know safety precaution then please read on:

Please see my basic troubleshooting guide here:


Proscan 40LD45Q... | Answered on Jan 04, 2019

Take it to a service technician, it is the cheapest way to repair unless you want to do the two year course.

Proscan... | Answered on Jan 01, 2019

I suspect something is wrong with the memory back up of the TV. It could be chip problem, or the power to the chip is lost due to a capacitor failure. Unless you are good at electronics it's one for the repair man.

Proscan... | Answered on Dec 31, 2018

  1. Turn on the device you wish to program to operate with the Philips Universal Remote Control.
  2. Hold down the "Code Search" button on the remote control. Release the button after the red indicator light blinks.
  3. Press the device button, such as "TV" "CLB" "VCR" or "SAT" This will make the indicator light blink off and then back on.
  4. Keep pressing the "CHAN +" button until the device changes channels. When the TV changes channels again, stop.
  5. Press the "Mute" button to save the code in memory.

Proscan... | Answered on Dec 12, 2018

I think your tv has picture tube problem. Bring it near to a mechanic.

Proscan... | Answered on Nov 26, 2018

Using the following two methods were suggested:

First, enter 0000. If one was never set, that is the default password.

Second, if a password was set, you will need the master override .

In order, press menu 1-4-7-0

That resets the default password to 0000

Proscan... | Answered on Nov 02, 2018

Try plugging the TV into another known good outlet. If there is no change unplug the TV for 30 minutes to 1 hour. Plug it in and try to turn the TV on again. If you have the same result, you have a bad main board that needs to be replaced. If its under warranty have it repaired or exchanged. If your warranty has expired take it to your local TV repair shop. Hope this helps.

Proscan... | Answered on Oct 29, 2018

Not finding what you are looking for?
Proscan Logo

2,653 questions posted

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides