Promise Computers & Internet - Recent Questions, Troubleshooting & Support
Promise nas ns4600 hard reset
1. On the rear of the SmartStor NS4600 you will find a small pin sized hole directly below the Ethernet connector. Push and hold the reset button using a paper clip or push pin until the SmartStor NS4600 "Powers Off". This generally takes about 25 to 30 seconds
2. Power-On SmartStor NS4600 and log into PASM (remember, password has been reset to default which is "admin"). You will need to re-enable services such as Windows, Macintosh, Unix/Linux, FTP and Printer Service. You will also need to enable permissions under "File and Print > File Sharing" and File and Print > Sharing Setup" as these have been reset due to the configuration files being cleared. Once you reapply the permissions your NAS will become accessible again from clients.
SBCglobal NuMbER {1=855=536**5666}#O@ ARKANSAS
Your message does not qualify as a question or query for a problem, try somewhere else
DO NOT MAKE THIS SITE WITH YOUR GARBAGE
Take your GARBAGE to another Side
Your message qualifies as SPAM
9/18/2019 4:39:16 PM •
Promise...
•
Answered
on Sep 18, 2019
Not finding what you are looking for?