Procom Recent Questions, Troubleshooting Help & Support

If you are using propane make sure the unit is set up for propane. If you are using natural gas make sure the unit is set up for natural gas. Next blow out piolet assembly with compressed gas. call me with any questions 3153418739

• The dual regulator part number RV83FI and the Procom Model SSD24TB Serial 4359689 are not unique to the current knowledge upgrade. Consult the Procom user handbook or get in touch with Procom customer care to find the appropriate replacement part. Comprehensive information regarding compatible replacement parts should be included in the handbook. Examine the markings on the regulator for part numbers or specs, if any. If in doubt, get advice from a licensed service provider or a competent technician. Using the wrong part might cause problems with performance and raise safety risks. This answer is predicated on data as of January 2022.

Question edited to toss in a load of CAPS! Nope, if you can hear the motor then the motor is working. If it isn't blowing the fan just needs tightening up on the shaft. There is a small set screw with an Allen Key socket. Click the images tab. https://www.google.com/search?q=procom+blower+model+%23pf06-yjlf-f ..

This could be a sign of a faulty electrical connection in the infrared heating element. It is important to have a licensed electrician inspect the unit to ensure that it is safe to use. If the inspection reveals that the connection is faulty, the electrician can make the necessary repairs to ensure the unit is safe to use. Additionally, if you detect an odor coming from the unit, it is important to have it serviced as soon as possible, as this could indicate a more serious problem.

limited info generic answer ---failing --thermocouple ..regulator , gas valve ,-------thenmo out of alignment ---air in line

possible burner tube blocked with cob web

Use your warranty and contact service provider. usaprocom com

We have the same issue. Gas is getting to the regulator. But it's not coming out to the pilot light. I tried for months to use my warranty and all I got were a few emails from procomusa but they havent done a thing. I bought an expensive wall decoration.

I was wondering if you even figured out how to replace it. I've having the same problem.

1. Look over the user manual included with your fireplace. ...
2. Remove your fireplace's outer cover. ...
3. Put a fireplace key into the device's gas valve knob. ...
4. Hold a long lighter up to the burner and ignite it. ...
5. Turn the gas key. ...
6. Replace the fireplace's outer cover immediately.

The air intake for the blower is probably dirty / clogged. This is causing the blower motor to work harder and overheat. Since the motor generates heat the sensor that turns on the motor does not cool enough to shut off the motor.

Here is a link to what you will need. https://www.techxdirect.com/remote-controls/

No. The thermostat gets its power from the heater. The batteries only operate the relays in the thermostat. If there is no power to the relays the heater won't operate in any mode.

over fuelling or lack of air supply check air supply system