I have a WMF Presto coffee machine and when I switch it on it comes up with WMF-AG V-Bootmanager 9,0 USB 1.1 on the screen and cannot do anything at all with the machine
The message you are seeing on your WMF Presto coffee machine suggests that it is stuck in the boot process and is unable to start up properly. This could be caused by a software or hardware issue.
Here are some steps you can try to troubleshoot the issue:
- Check the power supply: Make sure that the machine is properly plugged into an electrical outlet and that the outlet is functioning correctly. If the outlet is not working, try plugging the machine into a different outlet.
- Restart the machine: Try turning the machine off and on again to see if it resolves the issue. If this doesn't work, try unplugging the machine from the power source, wait for a few seconds, and then plug it back in.
- Check the USB port: The message you are seeing on the screen suggests that the machine is looking for a USB device. Check to make sure that there is no USB device plugged into the machine. If there is, remove it and try restarting the machine.
- Contact the manufacturer: If none of these steps work, it may be a hardware issue. Contact the manufacturer or a qualified technician to diagnose and fix the issue.
It's important to note that attempting to fix the machine yourself may void the warranty or cause further damage.
I have a prest heatdish.when i pull out the plug the plug is burning heat
Dear Sondra,
You might well have started a fire in your walls.
You are very observant.
Please do not plug this machine in again.
Take it back to COSTCO somewhere with the store receipt and they should replace it or refund the money.
You will need to find the store manager.
Please do not list your phone numbers on a public web site, because people can read this who you do not wish to do so.
God bless your efforts.
I have an older Presto Heat Dish. I have never had
I am no laser specific on this piece of equipment but any time a set of contacts arc to a degree where they smoke, they are overheating due to resistance being too high. Could be a worn out set of contacts or the current being passed thru them is higher than the contacts are rated for. I am assuming this is an electric heat unit, if so, the element(s) may be having issues.
Proluxe
At Proluxe, we provide the professional Dough Pizza Sheeter for every kitchen. Let's take your pizza production to the next level. Get a free Pizza Dough Recipe Today! Contact with our service provider for more info!
DPR3000 Proluxe
Not finding what you are looking for?