Precor Exercise & Fitness - Page 6 - Recent Questions, Troubleshooting & Support

are 2 solution, try to replace the acceleration button, or membrane for to fix it. 2) replace the complete Console. You can call to the service support and ask for the membrane for to replace, or see if your operator manual for the part number. Blessing [email protected] whatsApp:+50588611441

Sorry to say its time to replace the belts You may purchase them directly from Precor @ 1-800-347-4404 or
http://www.gympart.com or http://www.sportsmith.net
Have your serial number

You would need to check the amperage as well.

It's most likely that you have some damaged wiring. Make sure that where the urights connect to the console and the base frame that there are no pinched wires. You would want to measure the motor voltage in AC, but that's definitely not the problem anyway. If the wiring is not pinched or broken then it could be that your motor controller needs to be replaced. This is not unheard of when a machine is left sitting after it's been moved.

Very carefully

If you wish to get some details about precor treadmill error codes ; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

The micro switch is probably bad, the button (micro switch) needs to be replaced.

is the safety key inserted as there may be a connection to not allow the unit to operate unless the key is in position